|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2020, 07:53 PM | #1 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Issues after lithium and FN1 install
I have a 1996 ezgo txt I upgraded to the following prior to today:
SR48500 Controller 400amp solenoid HD FnR switch 48v (from 36) Today I did the following: - removed batteries and installed roypow pack (48v) - swapped plug from old txt to new 48v txt/rxv receptacle - added FN1 on the fly switch The pack is showing full charge but I get nothing to solenoid. I did the following as well: - wired new receptacle as red to positive, black to negative, blue wire to original Reed switch bypass on FnR, left gray wire unhooked - reset controller and added FN1, made a few minor adjustments to fn1, changed max amps to 400 on controller, pushed to controller. I dont know what I may have messed up to get no solenoid click on the pedal push. I also don't know where to start with a voltmeter. Any thoughts or ideas are welcome. My first step is I am going to unhook the fn1, and reset the controller back to see what happens to rule out the fn1. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-27-2020, 01:02 PM | #2 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Issues after lithium and FN1 install
Did a few measurements.
- 54 volts at battery pack - 54 volts on battery side of solenoid - 51.4 volts on other solenoid post - unhooked large posts on solenoid - turned cart on, pressed pedal and measured small posts. 0 voltage, still no click. I am assuming the solenoid is good then - when connecting controller to pc, and monitoring, getting no error led on controller and no errors in application Not sure where to go next. Any guidance is appreciated |
09-27-2020, 01:27 PM | #3 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Issues after lithium and FN1 install
Ok. So it took some more reading. Im an idiot and didn't pay attention. When doing the rxv plug conversion, I forgot that its based on the old Reed switch bypass, so I needed to send pack voltage to the FnR switch vs the blue wire going to the white and red wire. Pack to red white went back to working immediately
|
11-04-2020, 07:41 PM | #4 |
Not Yet Wild
Join Date: Nov 2019
Location: Hartsville SC
Posts: 1
|
Re: Issues after lithium and FN1 install
so how is the roypow pack (48v)? I saw them today on ebay and wondered if they were a quality battery, i had not heard of them before. looks convenient and priced nicely!
|
11-05-2020, 01:55 PM | #5 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Issues after lithium and FN1 install
They are growing in popularity. I like the plug and play ability so I didnt have to build my own pack. Ive been happy with it so far, just working on getting the adjustments right on my controller. With the weight drop, it really wants to jump at takeoff. I probably wouldn't go ebay. Find a local dealer. I know of 2 here in Georgia now. Pricing was fair
|
11-05-2020, 02:15 PM | #6 | |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Issues after lithium and FN1 install
Quote:
|
|
11-07-2020, 02:33 AM | #7 |
Not Yet Wild
Join Date: May 2016
Location: Griffin, GA
Posts: 66
|
Re: Issues after lithium and FN1 install
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Issues with Allied Lithium packs | Lithium EZGO | |||
Lithium Leaf pack install? | Lithium EZGO | |||
new xct alltrax install issues | Electric Club Car | |||
Anyone install lithium setup for me in GA or FL | All things Lithium | |||
Issues with controller install | Electric EZGO |