|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-20-2009, 01:13 PM | #1 |
Not Yet Wild
Join Date: Jun 2009
Posts: 8
|
G16 Motor Bolt Torque
I am rebuilding my g16 motor & i don't know the bolt torque for the connecting rod,head etc. I also don't know the valve clearance adjustment.
Any help will be much appreciated.--thanks EDDIE |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-20-2009, 05:54 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 Motor Bolt Torque
rod bolts-14 ft lbs. case bolts-2-large 27 ft lbs, small ones-19 ft lbs. head bolts-36 ft ft lbs. valves are adjusted to .004 when the engine is cold (both intake and exhaust.
|
10-20-2009, 06:11 PM | #3 |
Not Yet Wild
Join Date: Jun 2009
Posts: 8
|
Re: G16 Motor Bolt Torque
Thank You So Much For The Information--it Is Greatly Appreciated
|
10-20-2009, 06:31 PM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 Motor Bolt Torque
|
10-20-2009, 06:38 PM | #5 |
Not Yet Wild
Join Date: Jun 2009
Posts: 8
|
Re: G16 Motor Bolt Torque
Dave
I Haven't Started To Assemble The Engine Yet--the Parts Won't Arrive Till Friday.---thanks Again I Will Stagger The Rings |
10-20-2009, 06:52 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 Motor Bolt Torque
Sorry I don't have a good picture, but.....Your piston will have an arrow-this will point to the front (intake side). Now think of the arrow as being 12 oclock. the upper oil ring will be at 4 oclock, the lower oil ring at 10 oclock, with the oil expander, some were inbetween. The 2nd ring at 8 oclock and the top ring at 2 oclock. Hope that makes sence.
|
10-20-2009, 07:32 PM | #7 |
Not Yet Wild
Join Date: Jun 2009
Posts: 8
|
Re: G16 Motor Bolt Torque
Thanks So Much For The Help--if I Run Into Trouble I Will Let You Know ---thanks Eddie
|
10-20-2009, 10:54 PM | #8 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: G16 Motor Bolt Torque
Smallblock got it going on!!!
|
10-21-2009, 06:47 AM | #9 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: G16 Motor Bolt Torque
Thanks for all the info and help here smallblock. Great posts.
|
|
|
10-21-2009, 12:51 PM | #10 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 Motor Bolt Torque
Dave is the man!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Bolt Torque Values | Gas Yamaha | |||
Torque for clutch bolt | Gas Club Car | |||
Torque Motor | Golf Carts and Parts | |||
96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car | |||
Head bolt torque | Gas Club Car |