|
08-14-2010, 09:15 PM
|
#1 |
|
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
clutch bolt
i missed placed my rear clutch bolt for my 87 club car is there a place that might sell them i checked with the sponsors but i could not find any :(
or can i just use a bolt from a hardware store with a washer or something ??? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-14-2010, 10:31 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2010
Location: Snowy NW PA
Posts: 275
|
Re: clutch bolt
I don't know what the thread count is or the hardness or how long it should be, if it has a shoulder or threaded all the way. Too many things to guess at. You are going to need to know these things before you start looking. Especially the thread count. you should probably have at least a grade 8 bolt. If you have a real old fashion Hardware store, you may find one, but, it is unlikely you will find one at Lowe's, Home Depot, or NAPA Auto, etc. Best bet is to call a CC dealer and order one unless you can find one off a dead cart someplace.
|
|
|
|
|
08-15-2010, 08:31 PM
|
#3 |
|
The Last Moja Morani
 Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: clutch bolt
i beleive its left handed thred if its the drive clutch........................
 |
|
|
|
|
08-15-2010, 09:11 PM
|
#4 |
|
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: clutch bolt
i found a bolt on my cart that fits perfect in to the rear clutch, it has a "M" marking on the top of the bolt, im trying to see if anyone else has that marking on there's just to see if its the correct bolt
|
|
|
|
|
08-15-2010, 11:30 PM
|
#5 |
|
Gone Wild
Join Date: Jun 2010
Location: Snowy NW PA
Posts: 275
|
Re: clutch bolt
If it is left hand thread, (turns counter clockwise to tighten) it is most likely the missing bolt. Left hand thread bolts are just not that common that you would happen to "find" one that fits perfect just laying around your garage. (unless your garage looks like mine, really big and a mess
 ) |
|
|
|
|
08-16-2010, 07:06 AM
|
#6 |
|
Gone Wild
Join Date: May 2010
Location: NW Indiana
Posts: 283
|
Re: clutch bolt
The rear clutch ( driven ) shouldn't be left handed IIRC . The front clutch ( drive ) is.
|
|
|
|
|
08-16-2010, 07:18 AM
|
#7 |
|
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: clutch bolt
i really did not pay any attention to the threads on the bolt, all i no it fits in there really nice and tight with out any wiggle.....
|
|
|
|
|
08-16-2010, 08:28 AM
|
#8 |
|
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: clutch bolt
Standard 5/16-18 (coarse thread) 1" long. Common bolt from any hardware will be OK.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Clutch bolt size | Gas Yamaha | |||
| bolt for clutch on 00 ezgo | Gas EZGO | |||
| Torque for clutch bolt | Gas Club Car | |||
| 96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car | |||
| trouble getting clutch bolt out | Gas Yamaha | |||
Linear Mode
