Speed magnet GE motor

Cruise Master · 12-31-2016, 05:10 PM

Just for the record books, whey you guys say the speed sensor snaps off do you mean pull straight back, pinch it together then pull (releasing teeth,) or is there a twist to line up grooves then pull back like in a car light bulb?

Last thing I want to do is break the darn thing.

TahoeDawgZ71 · 01-02-2017, 08:05 PM

Quote:

Originally Posted by Cruise Master

Just for the record books, whey you guys say the speed sensor snaps off do you mean pull straight back, pinch it together then pull (releasing teeth,) or is there a twist to line up grooves then pull back like in a car light bulb?

Last thing I want to do is break the darn thing.

Just stick a flat head screw driver under the little ear on the speed sensor and gently pry outward. It'll pop out.

Greenjeep76 · 01-19-2017, 11:47 AM

I removed the screws on a ge motor, can I remove the the end cap to find the bearing retainer? Does the motor have to come out? Thanks in advance.

TahoeDawgZ71 · 01-19-2017, 01:33 PM

Quote:

Originally Posted by Greenjeep76

I removed the screws on a ge motor, can I remove the the end cap to find the bearing retainer? Does the motor have to come out? Thanks in advance.

Yes, you can remove it, but you're going to need some longer screws to align the bearing retainer once you put the cap back on.

jjplacer38 · 04-23-2021, 10:30 AM

HOW THE HECHT DO YOU GET THE GE MAGNET (RED) OUT ??? (Yes, speed sensor is popped off already). I HAVE A CLUB CAR 2002 DS IQ. Thanks, Bill

jjplacer38 · 04-23-2021, 10:36 AM

ANY IDEA HOW TO GET THE MAGNET ITSELF OUT ??? Thanks, Bill

CP241 · 04-23-2021, 01:25 PM

I had to use a paint can opener key thingy welded to the end of a slide hammer. It came out in pieces but I got the bastar d outta there. There was no “gentle” about it... it wasn’t coming out any other way.

Purpleharley61 · 04-23-2021, 01:36 PM

Mine wasnt easy either. I used a screwdriver and a 90% angle pick. Seems like the center was frozen on shaft some. Use penitrating oil to free off of shaft. I did not take my motor out. I just removed splash shield to gain access. Mine was a 97 ge motor.

Adjake · 10-05-2021, 10:26 AM

Thread revival… how do you get the magnet back on. I’ve broken 2
of them so far

12-31-2016, 05:10 PM	#51
Cruise Master Gone Wild Join Date: Aug 2015 Location: summer-north,winter-south Posts: 588	Re: Speed magnet GE motor Just for the record books, whey you guys say the speed sensor snaps off do you mean pull straight back, pinch it together then pull (releasing teeth,) or is there a twist to line up grooves then pull back like in a car light bulb? Last thing I want to do is break the darn thing.

01-19-2017, 11:47 AM	#53
Greenjeep76 Not Yet Wild Join Date: Jan 2017 Location: Fairhope, AL Posts: 1	Re: Speed magnet GE motor I removed the screws on a ge motor, can I remove the the end cap to find the bearing retainer? Does the motor have to come out? Thanks in advance.

04-23-2021, 10:30 AM	#55
jjplacer38 Not Yet Wild Join Date: Apr 2021 Posts: 2	Re: Speed magnet GE motor HOW THE HECHT DO YOU GET THE GE MAGNET (RED) OUT ??? (Yes, speed sensor is popped off already). I HAVE A CLUB CAR 2002 DS IQ. Thanks, Bill
jjplacer38 Not Yet Wild Join Date: Apr 2021 Posts: 2

04-23-2021, 10:36 AM	#56
jjplacer38 Not Yet Wild Join Date: Apr 2021 Posts: 2	Re: Speed magnet GE motor ANY IDEA HOW TO GET THE MAGNET ITSELF OUT ??? Thanks, Bill
jjplacer38 Not Yet Wild Join Date: Apr 2021 Posts: 2

04-23-2021, 01:25 PM	#57
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,673	Re: Speed magnet GE motor I had to use a paint can opener key thingy welded to the end of a slide hammer. It came out in pieces but I got the bastar d outta there. There was no “gentle” about it... it wasn’t coming out any other way.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-23-2021, 01:36 PM	#58
Purpleharley61 Getting Wild Join Date: Jun 2019 Location: Lexington, nc Posts: 143	Re: Speed magnet GE motor Mine wasnt easy either. I used a screwdriver and a 90% angle pick. Seems like the center was frozen on shaft some. Use penitrating oil to free off of shaft. I did not take my motor out. I just removed splash shield to gain access. Mine was a 97 ge motor.

10-05-2021, 10:26 AM	#59
Adjake Not Yet Wild Join Date: Jul 2016 Posts: 73	Re: Speed magnet GE motor Thread revival… how do you get the magnet back on. I’ve broken 2 of them so far
Adjake Not Yet Wild Join Date: Jul 2016 Posts: 73

Similar Threads
Thread	Forum
Speed Magnet Accidental Find for DS IQ Regen with GE Motor	Electric Club Car
GE high speed motor magnet ???	Electric Club Car
Speed Magnet	Electric Club Car
Another speed magnet ?	Electric EZGO
Speed Magnet Accidental find for DS IQ Regen with GE Motor	Extreme DC!