Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch

scottyb · 03-16-2013, 11:21 PM

Look closely, the motor terminals are marked.

Notice the terminals on your controller should be marked too and the F&R? Just keep everything in the same place there. Mark your F&R cables 9,12,3,and 6 o-clock

GlfCrtManiac · 03-17-2013, 02:53 PM

where do the 2 resistors go?
how do i mount the amp?

GlfCrtManiac · 03-17-2013, 03:01 PM

the amp screw holes are further apart than the screw holes i the speed control, how do I attach? the speed control is bigger than the original cover for the speed control. Do I not re-attach the cover? How am I supposed to attach the speed control to the silver heat dissipating plate?

scottyb · 03-17-2013, 03:32 PM

Quote:

Originally Posted by GlfCrtManiac

the amp screw holes are further apart than the screw holes i the speed control, how do I attach? the speed control is bigger than the original cover for the speed control. Do I not re-attach the cover? How am I supposed to attach the speed control to the silver heat dissipating plate?

Clear diagrams & instructions are in the manual.

GlfCrtManiac · 03-17-2013, 05:11 PM

I'm sure that's the case, but I'm not understanding the diagrams.
Based on the picture I attached of the motor, the outputs are positioned differently than the diagram. Will you tell me based on the picture which is A2, A1,S1, & S2

S2

Also, you said A2 becomes A to B, by that do you mean b=M-?

Thank you.

GlfCrtManiac · 03-17-2013, 05:23 PM

another question.. does the amp not directly install to the controller? because, I can only fit one screw, based on the hole placement.

GlfCrtManiac · 03-17-2013, 06:21 PM

is this how mount it? like the smaller one in the next photo?

scottyb · 03-17-2013, 07:04 PM

I think by 'amp' you mean solenoid? If you have the large brown and silver solenoid the mount is wider than the controller solenoid mount.
You can move the holes over a little with a dremel or drill.
Or you can send it to me and I will do it for you.

I see there on page 24 of the mini manual Alltrax says they have a mounting instruction video on their website.

Call me for a quick answer to all your install questions.

03-16-2013, 11:21 PM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch Look closely, the motor terminals are marked. Notice the terminals on your controller should be marked too and the F&R? Just keep everything in the same place there. Mark your F&R cables 9,12,3,and 6 o-clock

03-17-2013, 02:53 PM	#12
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch where do the 2 resistors go? how do i mount the amp?
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16

03-17-2013, 03:01 PM	#13
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch the amp screw holes are further apart than the screw holes i the speed control, how do I attach? the speed control is bigger than the original cover for the speed control. Do I not re-attach the cover? How am I supposed to attach the speed control to the silver heat dissipating plate?
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16

03-17-2013, 05:11 PM	#15
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch I'm sure that's the case, but I'm not understanding the diagrams. Based on the picture I attached of the motor, the outputs are positioned differently than the diagram. Will you tell me based on the picture which is A2, A1,S1, & S2 S2 Also, you said A2 becomes A to B, by that do you mean b=M-? Thank you.
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16

03-17-2013, 05:23 PM	#16
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch another question.. does the amp not directly install to the controller? because, I can only fit one screw, based on the hole placement.
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-17-2013, 06:21 PM	#17
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch is this how mount it? like the smaller one in the next photo?
GlfCrtManiac Not Yet Wild Join Date: Mar 2013 Posts: 16

03-17-2013, 07:04 PM	#18
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Have 2002 series txt, switching from 32v-48v and alltrax 485 and f&r switch I think by 'amp' you mean solenoid? If you have the large brown and silver solenoid the mount is wider than the controller solenoid mount. You can move the holes over a little with a dremel or drill. Or you can send it to me and I will do it for you. I see there on page 24 of the mini manual Alltrax says they have a mounting instruction video on their website. Call me for a quick answer to all your install questions.

Similar Threads
Thread	Forum
2002 series 48v resistor or what ever it is	Electric Club Car
DS Series owners with Alltrax controllers...	Electric Club Car
EZGO switching ignition switch	Big Block Talk!
2002 Series 48v Club Car	Golf Carts and Parts
Alltrax 500 amp controller help for EZGO series TXT	Electric EZGO