|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-15-2014, 10:09 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Posts: 6
|
G9 Yamaha has been sitting a while
Hey guys,
seen and read a lot of good info on here. Thanks!!! I have recently aquired my dad's old g9 (1991 model) it has been sitting for about 2 years. I have removed all of old gas, cleaned out carb, new plug, new belts, new battery, new air filter, changed oil, pressure washed. What else do I need to do to this G9 ? I'm sure there is something I'm over looking. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2014, 10:40 PM | #2 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: G9 Yamaha has been sitting a while
Welcome to BGW!!!
Change the rearend oil, check the brakes, and have fun with it. |
07-15-2014, 10:49 PM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Yamaha has been sitting a while
One pump of grease in each zirk on each clutch!! THEN, rotate the wheels MAN!!
|
07-16-2014, 08:45 PM | #4 |
Not Yet Wild
Join Date: Jul 2014
Posts: 6
|
Re: G9 Yamaha has been sitting a while
Thanks guys, any sugestions on the brake pedal? You have to pull it back up after each use. sprayed what was easily visible with PB Blaster. Still not working right.
|
07-16-2014, 09:35 PM | #5 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Yamaha has been sitting a while
The spring is broken down by the brake pedal shaft. Probably be a B...... to get off.
|
07-17-2014, 07:12 PM | #6 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: G9 Yamaha has been sitting a while
The bolt can rust into the pedal, or corrode I suppose. Start spraying it down now with PB every few days or something. I did mine twice finally had to drill the pedal larger. I filled it with wheel bearing grease each time. The spring does get weak my new one worked like a charm but still had to fix the bolt so it moved freely. Its been working nice for years after I drilled it out.
|
07-20-2014, 06:34 PM | #7 |
Not Yet Wild
Join Date: Jul 2014
Posts: 6
|
Re: G9 Yamaha has been sitting a while
thanks. I'll give it a try.
|
07-22-2014, 07:49 PM | #8 |
Not Yet Wild
Join Date: Jul 2014
Posts: 6
|
Re: G9 Yamaha has been sitting a while
Thanks sho305,
I ended up pulling the brake assembly apart and cleaning. Bead blasted all rusted parts, greased and put back together. Works great!!!! Thanks |
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 DS won't move after sitting | Electric Club Car | |||
Bought an 02 been sitting for years | Electric EZGO | |||
G16 been sitting for a few years. | Gas Yamaha | |||
How do I start and engine that has been sitting? | Gas EZGO | |||
cart just sitting there | Gas Club Car |