05-02-2020, 02:22 PM | #1 |
Not Yet Wild
Join Date: Apr 2020
Location: Longwood FL
Posts: 69
|
FNR F&R Switch
My 2008.5 precedent project didnt have a f&r switch, so obviously i need to purchase one. Is the stock one sufficient for future upgrades or is there an HD on I should be considering instead? Its all stock for now, but possibly controller/motor uogrades in the future. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-02-2020, 02:24 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: FNR F&R Switch
Assuming IQ drive the stock switch is all that will be needed no matter how big or small you go.
This is true for all sepex carts |
05-02-2020, 03:21 PM | #3 |
Not Yet Wild
Join Date: Apr 2020
Location: Longwood FL
Posts: 69
|
Re: FNR F&R Switch
Yes its IQ, and thank you!
|
05-02-2020, 11:23 PM | #4 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: FNR F&R Switch
Sweaver the reason is on an IQ/Excel style carts, all the high voltage switching is handled through the controller. Unlike the Series carts where it was handled through the FNR switch. As you increased amperage/current, the added heat and loading would cause failures in standard duty shifters.
|
05-03-2020, 04:39 PM | #5 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: FNR F&R Switch
Yep, as stated, no upgraded switch needed with a sepex car.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring Alltrax for reverse with single micro-switch F&R switch... | Electric Club Car | |||
99 club car 48 volt has rocker switch with diag plug hole in bottom of switch | Electric Club Car | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |