2005 Electric IQ won't go

[ForBruce]

yes..to the THIN wires. Not the heavy wired main posts.. Leave the wires connected while you measure ....

does not matter which way you connect the volt meter .if it's digital it will read eith plus or negative voltage . if the meter has a SWINGING scale then the meter will go backwards toward the "ZERO" and you must reverse your test leads

[buggy1]

Originally Posted by ForBruce

yes..to the THIN wires. Not the heavy wired main posts.. Leave the wires connected while you measure ....

does not matter which way you connect the volt meter .if it's digital it will read eith plus or negative voltage . if the meter has a SWINGING scale then the meter will go backwards toward the "ZERO" and you must reverse your test leads

Thanks for the answers. Is there a certain amount of current to look for? This may or may not be true , but I thought I read on a similar discussion that there are 2 sepere selonoids for this cart?

[buggy1]

Originally Posted by ForBruce

yes..to the THIN wires. Not the heavy wired main posts.. Leave the wires connected while you measure ....

does not matter which way you connect the volt meter .if it's digital it will read eith plus or negative voltage . if the meter has a SWINGING scale then the meter will go backwards toward the "ZERO" and you must reverse your test leads

I have a digital meter on which I am getting roughly 4 volts and more of a pop instead of the click? May be because the seat is off and the sound is not deadend? I didn't get the pop but twice out of 5 tries. Oh yeah, no go either. This is really frustrating.

[ForBruce]

the 2005 club car precedent has only one solonoid and the VOLTAGE (not current) should read 48 volts at the solonoid coil wires ( thin wires)

switch set to RUN

[shadowman]

buggy1 please don,t take this personal its not meant to be its meant to be more helpful........as your new so you know its much easier if you start your own thread for a problem and add all the info you can , year model and whatever upgrades and modifications have been done.............sometimes its difficult enough helping someone and than someone jumps in and hijacks the thread and it gets ever harder............oh and welcome to BGW.......so just for future its just a lot easier to help one person per one thread..........................

[buggy1]

Originally Posted by shadowman

buggy1 please don,t take this personal its not meant to be its meant to be more helpful........as your new so you know its much easier if you start your own thread for a problem and add all the info you can , year model and whatever upgrades and modifications have been done.............sometimes its difficult enough helping someone and than someone jumps in and hijacks the thread and it gets ever harder............oh and welcome to BGW.......so just for future its just a lot easier to help one person per one thread..........................

Will do. Thanks

[swammy]

Aggie,
Did you ever get this figured out? I am having a similar problem with the same cart and was curiously following this thread.
Thanks

[shadowman]

swammy welcome to BGW.............why not start a thread and post as much info as you can and we,ll see where to go ...............i think you,ll be ahead of the game as 2 carts doing the same thing can have much different issues and sometimes its the tinyest bit of info that makes the difference...................................