After market turn signal installation.. questions

oconnorb · 11-13-2011, 02:41 PM

Cart – 1997 CC Frontier Villager 48V, I desire to install turn signals, several aftermarket kits are out there, but the question I have is, as I look at the front and rear lights there are two additional wires coming out of the loom that are “capped” off at each front light and rear light location. Is the CC already wired for turn signal and all I have to do is find the harness plug in behind the dash? Hoping someone else has a 97 that they either have turn signals on or installed.

Thanks,

Beryl

shadowman · 11-13-2011, 05:27 PM

it may be wired for another light but i don,t think its just for turn signals.........your gonna have to add marker lights and that may be where you tap into them ..............................................

oconnorb · 11-25-2011, 11:03 PM

Install complete, the wiring that I located behind the stock CC dash was for the front marker lights, ran the turn signal yellow and green to theses, tapped the rear turn signals into the brake light bulb wiring and all is good to go.

11-13-2011, 02:41 PM	#1
oconnorb Gone Wild Join Date: Aug 2011 Location: Va Beach, Virginia Posts: 324	After market turn signal installation.. questions Cart – 1997 CC Frontier Villager 48V, I desire to install turn signals, several aftermarket kits are out there, but the question I have is, as I look at the front and rear lights there are two additional wires coming out of the loom that are “capped” off at each front light and rear light location. Is the CC already wired for turn signal and all I have to do is find the harness plug in behind the dash? Hoping someone else has a 97 that they either have turn signals on or installed. Thanks, Beryl

11-13-2011, 05:27 PM	#2
shadowman The Last Moja Morani Join Date: Jan 2007 Location: jumping from cart to cart Posts: 8,975	Re: After market turn signal installation.. questions it may be wired for another light but i don,t think its just for turn signals.........your gonna have to add marker lights and that may be where you tap into them ..............................................

11-25-2011, 11:03 PM	#3
oconnorb Gone Wild Join Date: Aug 2011 Location: Va Beach, Virginia Posts: 324	Re: After market turn signal installation.. questions Install complete, the wiring that I located behind the stock CC dash was for the front marker lights, ran the turn signal yellow and green to theses, tapped the rear turn signals into the brake light bulb wiring and all is good to go.

Similar Threads
Thread	Forum
Turn signal installation	Electric EZGO
No turn signal	Electric EZGO
Which turn signal kit?	Electric EZGO
Turn signal help	Lifted Golf Carts
Turn signal	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum