|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-28-2017, 03:16 PM | #1 |
Getting Wild
Join Date: Feb 2017
Location: US
Posts: 76
|
2006 TXT 36v Series cart - controller choice questions
It appears I need a new controller. As the title says, this is a 36v series cart. It has 6 fairly new Trojan T105s. The tires are stock "golf cart" tires and are fine for current needs. The charger is a separate Powerwise 36 volt. For now, it will just be used on flat grassy terrain and limestone/gravel paths around our property. As discussed in my troubleshooting thread (again, thanks to JohnnieB!), I totally disassembled and cleaned the F&R cam and switch (it was in good condition but it seemed to be worth doing in the troubleshooting phase, just in case) and made new 6 ga. cables to the motor. The battery cables are in good shape. IOW, I'm not really interested in replacing all of that right now.
I doubt I'll do much upgrading to it, but can't say that I definitely won't. I really doubt I'd ever really trick it out and the difference between 20 and 30 mph would be a non-factor right now. About all that I plan to do right now is add some LED headlights and 12v outlet, so for now, I'll probably just add a deep cycle 12v "house battery" rather than a 36v to 12v reducer (I have the battery already, so that seems the way to go but ???). I can get a stock controller (used takeoff) for under 100.00. There are LOTS of threads here and other info on the web with LOTS of different thoughts on which way to go, but all that I've found involve immediate other upgrades like more voltage, motor upgrades, lifts and larger tires, etc., or the plan for such with future upgrades. So, I'd welcome any suggestions, thoughts or ideas about what controller I should get. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-28-2017, 04:11 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2006 TXT 36v Series cart - controller choice questions
There are 2 types of cart users. Those who are happy with a good running golf cart and those who wish to improve performance. You seem to be talking your way into the fist group - happy with good running golf cart.
Take off controllers are going to be hit n miss. Wear and damage to electronics from both use and abuse is accumulative. Years of use takes it's toll. But $100 is cheap. That may be the best way to go... if you don't mind walking Generally I recommend anybody who is buying an aftermarket control for a series TXT get the new Alltrax SR48400, you could get the SR48300 but it's a hefty stock replacement, what if you decide to get a rear seat or cargo box or trailer or more aggressive tires down the road? And besides that oversized controls do not work as hard as lower rated controls under the same loads which equals less wear and a longer useful life. SR48400 is my suggestion PS there is a new line of non programmable controls coming out this spring from Alltrax They are built on the SR platform but like the old NCX not recommended for modified carts. |
02-28-2017, 06:37 PM | #3 | |
Getting Wild
Join Date: Feb 2017
Location: US
Posts: 76
|
Re: 2006 TXT 36v Series cart - controller choice questions
Quote:
This cart has a expanded metal cargo box that appears factory (or it had a back seat and this replaced it) and if I understand it correctly, the series carts have more torque and less speed than the others, which is fine for what it will be used for - a light utility cart around the property, visiting neighbors, etc. I'm the heaviest thing by far this cart will ever have to carry If I understand it correctly, what aftermarket controllers will get me, basically, is upgrade-ready - they won't make the current motor substantially faster without adding batteries - correct? I would guess, perhaps wrongly, that 38 or so volts going to the stock motor via X gauge cables is the same whatever controller sends it - is that correct? |
|
02-28-2017, 07:05 PM | #4 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2006 TXT 36v Series cart - controller choice questions
I'd normally reply that even though you don't foresee an upgrade now, the upgrade bug will bite you. However, since you already have (had?) several carts, you already know what you want/need. Unless things change, you should be fine with stock. I drove stock for years, hauling 3 passengers plus me, and dragged dozens of fallen trees to the back yard fire pit. The only thing I killed was two solenoids.
I had the upgrade bug before I even bought mine, and knew I only had a few years before needing new batteries, so once the batteries were too slow uphill, I went with the upgrades in my sig. |
02-28-2017, 07:17 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2006 TXT 36v Series cart - controller choice questions
As to your last question, the main thing an upgraded series controller will give you is more amperage - torque. Uphill will be faster, larger tires will be better supported, off-road use will be enhanced, as more torque is available. Knobby tires have higher rolling resistance.
On flat pavement, with one passenger, you may not see a difference. However, I'd strongly recommend you consider new cables from ScottyB, based on what you described. Even though it sounds like you won't be pushing this cart very hard, you don't want to waste energy as heat, due to bad cables. A bad connection to the forward, neutral, reverse (FNR) switch can result in catastrophic failure of the FNR. After you get it running, check for hot cables, and hot connections. |
02-28-2017, 08:19 PM | #6 | |
Getting Wild
Join Date: Feb 2017
Location: US
Posts: 76
|
Re: 2006 TXT 36v Series cart - controller choice questions
Quote:
|
|
02-28-2017, 08:28 PM | #7 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2006 TXT 36v Series cart - controller choice questions
10-4.
As to the splice, it's possible the cart originally had a 4 blade controller, then was converted to a 3 blade? The 4th blade is for plug braking, and is more used in things like fork lifts, where you can go full pedal forward, then slam it into reverse, without stopping first. Just speculating, based on this wiring diagram. |
02-28-2017, 09:19 PM | #8 | |
Getting Wild
Join Date: Feb 2017
Location: US
Posts: 76
|
Re: 2006 TXT 36v Series cart - controller choice questions
Quote:
|
|
02-28-2017, 09:26 PM | #9 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2006 TXT 36v Series cart - controller choice questions
You can ignore the second attachment, but the first is just a .pdf, which you should be able to open in a number of free .pdf readers. Windoz 10 should just open it. I use Foxit, but Adobe Reader is also a free .pdf reader.
I personally like that wiring diagram, but there are many out there. It explains the plug braking "bypass". |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stock Controller 2006 TXT Standard Series | Electric EZGO | |||
Will a 95 series motor and controller fit in a 94 series cart? | Electric EZGO | |||
A few more questions about my 97 series cart... | Electric EZGO | |||
SERIES:Stock Charger, Controller, Solenoid, and ITS for sale off 2006 TXT | Golf Carts and Parts | |||
Choice between PDS or Series? Which and why? | Electric EZGO |