RXV Fuse Panel?

[dab929]

I have a stock 2011 RXV with OEM lights installed. The brake lights stopped working, the head lights and tail lights work. I assume there is a fuse and/or switch somewhere that has failed. I have looked all over for a fuse panel but can't locate anything. Before I screw something up messing with the RXV wiring can someone point me I the right direction? Is there a fuse panel hidden somewhere or do I need to order a brake peddle switch?

[cgtech]

Rxv OEM lights don't use brake pedal switch for lights. Rxv uses motor controller to command brake light on or off (based on controllers idea of pedal position). Do you hear a click under the cup holder when pedal pressed?

[dab929]

I will check and get back to you. thanks for the help

[dab929]

cgtech
Just went out and checked, yes there is a faint click when the peddle is pressed.

[cgtech]

Ok, remove cupholder, check for "3 grey wire jumper plug" if you don't have turn signals. Try wiggle turn signal handle with pedal pressed if you do have turn signal.

[dab929]

The cart is not equipped with turn signals I will check the jumper and get back to you

[06madaman]

I thought my brake lights were “broke” and had the same symptoms... head and taillights worked, but no brake. Well, I bought new bulbs (1157 sized) that had dual filaments and they worked. So, if you haven’t checked/replaced the bulbs...do that first! $5 fixed my problem!

[dab929]

Is this what you are referring to? I can feel it click when touching the brakes. If so does it need to be replaced and what is the part number.

[dab929]

Replaced the bulbs also did not make a difference.
Thanks