The motor for me

Hit it like a champ · 08-02-2018, 11:57 PM

Ok so i am pretty sure or am sure I am going to change motors this winter. So the question is what motor to get. I was thinking torque motor but I have read when you get the real high torque motors the speed goes way down. So I have a few mounts to figure this out so I am looking for more hill climbing torque but do not want to go to far under 20mph. I will buy the best motor available. My cart is a 2014 club car Precedent IQ with a alltrax 500 controller 400 solenoid and #2 welders cable. So I think I just need a motor or do I need additional parts. Advice please thanks Jerry

NoleFan4Ever · 08-03-2018, 12:32 AM

This one https://www.revolutiongolfcars.com/p...or-club-car-iq will pull the gate off of hades or front wheels off the ground and still get over 20mph with the controller you have...

Hit it like a champ · 08-03-2018, 06:24 AM

Quote:

Originally Posted by NoleFan4Ever

This one https://www.revolutiongolfcars.com/p...or-club-car-iq will pull the gate off of hades or front wheels off the ground and still get over 20mph with the controller you have...

That’s the one i have been looking at and i am sure I will get that one. I was also looking at the AMD 7114 motor. I want the torque i can gear up a little with tires i need to go up to at least a 22’’ tire because the selection is so much better. That means a bigger lift more money i should have started with a stock cart i am changing everything on it anyway.

08-03-2018, 07:55 AM

Quote:

Originally Posted by Hit it like a champ

I was also looking at the AMD 7114 motor.

You might consider the AMD 7144 instead.

08-02-2018, 11:57 PM	#1
Hit it like a champ Gone Wild Join Date: Jun 2018 Location: Kersey Pennsylvania Posts: 437	The motor for me Ok so i am pretty sure or am sure I am going to change motors this winter. So the question is what motor to get. I was thinking torque motor but I have read when you get the real high torque motors the speed goes way down. So I have a few mounts to figure this out so I am looking for more hill climbing torque but do not want to go to far under 20mph. I will buy the best motor available. My cart is a 2014 club car Precedent IQ with a alltrax 500 controller 400 solenoid and #2 welders cable. So I think I just need a motor or do I need additional parts. Advice please thanks Jerry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
36v series motor what is acceptable voltage loss at the motor going up a hill	Electric EZGO
Trade high speed/torqe pds/dcs motor for series motor	Electric EZGO
Trade high speed/torque motor pds/dcs for series motor	Golf Carts and Parts
1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/	Gas Harley Davidson
Which gas motor to replace the stock motor in a 1994 Marathon GX444?	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-03-2018, 12:32 AM	#2
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: The motor for me This one https://www.revolutiongolfcars.com/p...or-club-car-iq will pull the gate off of hades or front wheels off the ground and still get over 20mph with the controller you have...