Trouble shooting help please

[costefishnt]

Have a gc that sizzled and stopped. Batteries new fully charged. Have 36v off solenoid to 5 pin connector to controller when pedal pressed but no movement.

Controller dead? Is there anything serviceable in the controller?

Sent from my SM-N975U using Tapatalk

[rockfordpi]

Originally Posted by costefishnt

Have a gc that sizzled and stopped. Batteries new fully charged. Have 36v off solenoid to 5 pin connector to controller when pedal pressed but no movement.

Controller dead? Is there anything serviceable in the controller?

Sent from my SM-N975U using Tapatalk

We are going to need more info about what year and type cart you have.

Do you get a solenoid click? If so, when solenoid clicks are you getting pack voltage on both of the big solenoid terminals when measured back to main battery negative.

[costefishnt]

I will check the voltages. But yes. Get the click. Will get back to yall in morning. Thank you so very much!

Sent from my SM-N975U using Tapatalk

[scottyb]

Sizzle is not a good thing. Get your nose on the controller and sniff. If it smells burnt it is...
You can bypass the solenoid by bolting a battery cable between the 2 big solenoid posts. IF the car still does not run, you have eliminated the solenoid as a problem source. Be sure you have power to the controller small wires where it should according to the diagram for this cart.