lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-02-2020, 02:22 PM   #1
Sweaver
Not Yet Wild
Club Car
 
Join Date: Apr 2020
Location: Longwood FL
Posts: 69
Default FNR F&R Switch

My 2008.5 precedent project didnt have a f&r switch, so obviously i need to purchase one. Is the stock one sufficient for future upgrades or is there an HD on I should be considering instead? Its all stock for now, but possibly controller/motor uogrades in the future. Thanks!
Sweaver is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-02-2020, 02:24 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
Default Re: FNR F&R Switch

Assuming IQ drive the stock switch is all that will be needed no matter how big or small you go.
This is true for all sepex carts
scottyb is offline   Reply With Quote
Old 05-02-2020, 03:21 PM   #3
Sweaver
Not Yet Wild
Club Car
 
Join Date: Apr 2020
Location: Longwood FL
Posts: 69
Default Re: FNR F&R Switch

Yes its IQ, and thank you!
Sweaver is offline   Reply With Quote
Old 05-02-2020, 11:23 PM   #4
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: FNR F&R Switch

Sweaver the reason is on an IQ/Excel style carts, all the high voltage switching is handled through the controller. Unlike the Series carts where it was handled through the FNR switch. As you increased amperage/current, the added heat and loading would cause failures in standard duty shifters.
NoleFan4Ever is offline   Reply With Quote
Old 05-03-2020, 04:39 PM   #5
jakesnake27
Gone Wild
 
Join Date: Aug 2009
Posts: 14,245
Default Re: FNR F&R Switch

Yep, as stated, no upgraded switch needed with a sepex car.
jakesnake27 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wiring Alltrax for reverse with single micro-switch F&R switch... Electric Club Car
99 club car 48 volt has rocker switch with diag plug hole in bottom of switch Electric Club Car
2009 Precedent run/tow toggle switch replaced with keyed switch Electric Club Car
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! Gas Yamaha


All times are GMT -5. The time now is 05:40 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.