|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-03-2020, 07:05 AM | #1 |
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Error Codes on New Alltrax / Motor Install
So I installed my new FSIP Motor, Alltrax XCT controller, solenoid, heavy gauge wires yesterday on my 2010 CC Precedent. After getting everything together it won't move at all. I am getting 2 error codes on the controller. It was late last night so I didn't troubleshoot much as I didn't want to make a stupid mistake. Any help would be appreciated.
1 Green & 2 Red - Battery Under Voltage I am getting 51 volts on the pack but didn't check anything else. 1 Green & 5 Red - Motor Field Failure |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-03-2020, 11:18 AM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Error Codes on New Alltrax / Motor Install
Double check your cabling between the controller and motor. It can get tricky but if you follow the drawing exactly it will be right. The only thing that sometimes happens is the F's are backwards and you have to swap them if it runs opposite of the selector switch.
|
05-04-2020, 06:57 AM | #3 |
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Re: Error Codes on New Alltrax / Motor Install
Thanks Nole Fan, I found and corrected one of the issues. Was able to chat with David on the other issues. Thanks for the reply
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Help! Alltrax XCT500 Precharge Error - New Install | Electric Club Car | |||
Connected Alltrax to laptop, now error codes | Electric EZGO | |||
600 amp alltrax error codes | Electric EZGO | |||
Alltrax SPM no error codes but not working | Extreme DC! | |||
OBC Error codes | Electric Club Car |