Question about voltage reducer

[seanmcg]

I've got a 2002 Club Car DS.

I bought a 48V-12V 30A reducer about a year ago and I'm finally getting around to installing it. The reducer I bought has four wires coming off it. Red (w/ fuse), green, yellow, and black.
Label on the side says:
Input: Red+ Black -
Control: Yellow
Output: Green + Black -

Where exactly do these wires go?

Thanks

[ACCLR8N]

Red and black go to your 48v battery bank. Yellow to the output of your key switch.

Green is to power your 12v accessories. Hopefully going to a fuse block distribution box.

12v accessories share the battery bank ground. Should be some kind of distribution block. Don't use chassis for ground like on a car.

[seanmcg]

Do you happen to have a schematic showing how that's done?

Can that yellow wire be connected directly to the controller? The factory reducer that was on the cart, was connected directly to the original controller.

[ACCLR8N]

Found this diagram online that fits what I was saying.

Yes you can connect the trigger wire to the controller. This would be the key on signal to the controller.

[garrettg]

So do you connect the yellow wire directly to the starter or do you splice the yellow wire into the appropriate wire coming out of the starter?

Thanks

[jkenprice1]

Thats not the starter, its the key switch