|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-07-2012, 12:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2012
Posts: 4
|
Toggle Switch Placement for Lights?
Hi i'm new to this website and i was just wondering where would be a good spot to place a toggle switch for lights on my 2006 EZGO? Regular 12v halogens, picked up on sale at a local tractor dealership. I have a regular on/off rocker switch. Sorry for the dirty cart, its for around the farm. Pictures will be added. Thank you!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-07-2012, 01:37 PM
|
#2 |
|
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: Toggle Switch Placement for Lights?
I installed lights on my 2007 PDS and mounted a PUSH-PULL switch right in the center of the black grommet that is near your right knee/leg when sitting in the cart (ends up almost directly below your right hand). No need to reach over to the dash. Worked great for me
 and you don't need to run the wires as far. Maybe your rocker switch will fit there as well. Check it out. Good luck - RAY |
|
|
|
|
07-07-2012, 01:57 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2012
Posts: 4
|
Re: Toggle Switch Placement for Lights?
The grommet as in the 4 cupholders?
|
|
|
|
|
07-07-2012, 02:39 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2012
Posts: 4
|
Re: Toggle Switch Placement for Lights?
oh i see what you mean now. Thanks! I'll keep this is mind..
|
|
|
|
|
07-07-2012, 03:58 PM
|
#5 |
|
Gone Mad
 Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Toggle Switch Placement for Lights?
Another option is to buy a three position EZ-GO key switch. The three position switches have two independent circuits, so one can control the 36 volt side and the other can control a 12 volt circuit for the lights.
|
|
|
|
|
07-07-2012, 09:48 PM
|
#6 |
|
Not Yet Wild
Join Date: Jul 2012
Posts: 4
|
Re: Toggle Switch Placement for Lights?
do i need an extra 12v batter or 2 six volts or can i switch the wires around every once in a while to wear down the batterys two at a time.. you know what i mean? but i doubt that the lights drain that much battery..
|
|
|
|
|
07-07-2012, 11:16 PM
|
#7 |
|
Not Yet Wild
Join Date: Oct 2011
Location: conway s.c.
Posts: 43
|
Re: Toggle Switch Placement for Lights?
my toggle is right of my knee. just reach down. easy 2 find in the dark.
|
|
|
|
|
07-08-2012, 06:54 AM
|
#8 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Toggle Switch Placement for Lights?
Just make sure whatever switch you use is outdoor rated. If you mount it in the FNR cover, it will get wet when you wash down the batteries and will be exposed to acid fumes.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| forward/reverse switch change to toggle switch | Electric Club Car | |||
| 2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
| G2 - G9 Toggle Switch On Cup Holder | Gas Yamaha | |||
| PDS Toggle Switch Mount | Electric EZGO | |||
| Headlights will not come on, but toggle switch is lit up? | Electric Club Car | |||
Linear Mode
