Mechanical brake adjuster replacement on 2007 TXT with PDS

[leeman57]

I have a 2007 36V TXT PDS that the passenger side adjuster is not working. I followed the details in the EZGO manual for checking the operation. Now that I have determined that the adjuster is not working, the manual says to replace both adjusters at the same time. The problem is that I don't see the replacement parts with the adjuster on the EZGO site. Does anyone know what I need to order to replace the adjusters? It seems that they are riveted to the brake plate, but the pictures I say on the EZGO website show just plate with the arm that connects to the adjuster.

Any help would be greatly appreciated.

[Sir Nuke]

Personally, before you start buying parts and replacing them. Why not remove the hub and clean everything REALLY good. I suggest this as my brakes were barely functional when I bought my cart, and would NOT adjust. I took apart both sides completely, cleaned every part, even took the adjusters apart (they are threaded together) lubed the parts that needed to be, put the new shoes on and adjusted them.....not only do they self adjust now, my cart will stop on a dime and can lock up the brakes at full throttle.

so I would give it a try to take them apart and clean it all before you spend the money.

[leeman57]

Already tore the brakes apart and cleaned, lubed and removed any glaze on the brake pads. Still would not work properly

[Sir Nuke]

the next question I would have is do the brakes work on passenger actually working. its possible that the cable is froze up (rusted up) on that side.