|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-12-2011, 08:54 AM | #1 |
Not Yet Wild
Join Date: Jan 2011
Posts: 6
|
Curtis 1206 controller wiring diagram
I found a Curtis 1206-002 controller in the shop and I'm thinking about putting it in a 1997 4 Caddy as a replacement. There is a 1205 controller currently in the cart.
The guy who worked in the shop years ago cut the controller out of a cart and there are no wire labels on the cables. The six pin connector is easy to figure out, but the controller only has 3 posts and the A2 post is blank. There is 1 cable on M-, 1 cable on B- and 2 cables on B+. What do you do with the two A2 cables? any help is appreciated! Joey |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-12-2011, 11:57 AM | #2 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: Curtis 1206 controller wiring diagram
amtrak, my 1206 controller didn't have the a2 either. pretty sure that that a2 was used for braking. now this needs to be confirmed, but pretty sure all you need is a cable from the fnr switch to the motor a2 on the motor. check in the stickies for a wiring diagram. they are located at the top of this forum.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1206 4 bar controller | Electric EZGO | |||
replacing a curtis 1206 with a 1204 | Electric EZGO | |||
04 CC Curtis Controller wiring | Electric Club Car | |||
Curtis 1206 Controller | Electric EZGO | |||
Curtis 1206 test ? | Electric EZGO |