|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-16-2013, 08:43 AM
|
#1 |
|
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Need input from experienced CC guys
Got a 02 48V Series DS that I am working on and it won't do full speed. Checked the mcor and it would go up to 10k ohms which I thought might be the problem but I switched it out with a new one and nothing changed. I have 50v at the batteries and b- and m- when solenoid clicks. Weird thing is with leads on B- and M- when the pedal is pushed all the way down I am left with 24v instead of 0. If mcor is good am I looking at a bad controller? I am going to see if I have one to switch out and try as much as I hate being a parts changer this one has me scratching my head.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-16-2013, 08:56 AM
|
#2 |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Need input from experienced CC guys
How fast does it go? You may be set speed code 1 and that isn't very fast.
Never mind I see it is a series cart |
|
|
|
|
05-16-2013, 10:51 AM
|
#3 |
|
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Re: Need input from experienced CC guys
Controller was the issue after all
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Marathon build i need some input guys | Lifted Golf Carts | |||
| OK G1 Guys, need advice/input please! | Gas Yamaha | |||
| any of you guys have any input on this one | Electric Club Car | |||
Linear Mode
