lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-23-2007, 09:06 PM   #11
NO NO NO E-Z-GO!
Gone Wild
 
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
Default Re: Painting the frame

I'd wire-wheel it again, just get fresh metal showing everywhere and then the oils in the under coating can soak into the metal pores.
NO NO NO E-Z-GO! is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-24-2007, 05:08 PM   #12
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
Default Re: Painting the frame

Start with 180 grit sand paper and remove any and all non bonded paint.
Wash the frame with paint thinner and clean paper towels. Spary with
primer 2-3 coats and let it cure. Using a fine scotch brite pad, lightly scuff
the surface of the primer. Now you are ready to finish coat the frame.

I have used Dupli-color truck bed coating on many projects with very
good results. Follow the instructions for application. Very tough stuff!!!

The product in rattle cans is the same stuff the pros use, just a different
delivery system.





TheNewGuy is offline   Reply With Quote
Old 06-24-2007, 07:42 PM   #13
Xtreme Cartz
The Fabricator
 
Xtreme Cartz's Avatar
 
Join Date: Dec 2006
Posts: 2,016
Default Re: Painting the frame

Quote:
Originally Posted by TheNewGuy View Post
Start with 180 grit sand paper and remove any and all non bonded paint.
Wash the frame with paint thinner and clean paper towels. Spary with
primer 2-3 coats and let it cure. Using a fine scotch brite pad, lightly scuff
the surface of the primer. Now you are ready to finish coat the frame.

I have used Dupli-color truck bed coating on many projects with very
good results. Follow the instructions for application. Very tough stuff!!!

The product in rattle cans is the same stuff the pros use, just a different
delivery system.
Thanks for the tip that sounds like it will make it stick for good. I used that same duplicolor truck bed coating on a golf cart utility box and it turned out awesome! Very durable.
Xtreme Cartz is offline   Reply With Quote
Old 06-25-2007, 12:49 AM   #14
cartin AK
Gone Wild
E-Z-GO
 
Join Date: Jan 2007
Location: Anchorage AK
Posts: 181
Default Re: Painting the frame

I also really like the dupli color bedliner, very tuff and if you do chip it it is easy to touch up. It is what i used to paint my drop axle, kids wagon, 4 wheelers A-arms and so on with A+++ results. If you have a rust problem, more than surface, I really like the POR-15 epoxypaint-primer. A little more money but works very well with rusted metal.
cartin AK is offline   Reply With Quote
Old 06-25-2007, 10:56 AM   #15
Xtreme Cartz
The Fabricator
 
Xtreme Cartz's Avatar
 
Join Date: Dec 2006
Posts: 2,016
Default Re: Painting the frame

I may need to use that for my limo frame because it is chewed up pretty bad. Thankfully there's no rust at all on my workhorse and I want to keep it that way.
Xtreme Cartz is offline   Reply With Quote
Old 06-27-2007, 10:44 PM   #16
club car man
Ford
 
club car man's Avatar
 
Join Date: Dec 2006
Location: New Castle, Pa
Posts: 3,437
Default Re: Painting the frame

I don't like the rubberized stuff because it doesn't stay rubberized forever. It gets dry and cracks and where it cracks water gets up in it and then gets trapped in there and still rusts the frame or whatever you're painting. Just my expierences with all rubberized stuff.
club car man is offline   Reply With Quote
Old 06-28-2007, 05:27 AM   #17
mphillip
Site Moderator
 
mphillip's Avatar
E-Z-GO
 
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
Default Re: Painting the frame

Quote:
Originally Posted by club car man View Post
I don't like the rubberized stuff because it doesn't stay rubberized forever. It gets dry and cracks and where it cracks water gets up in it and then gets trapped in there and still rusts the frame or whatever you're painting. Just my expierences with all rubberized stuff.

Kinda like your glove then HUH!!!!
mphillip is offline   Reply With Quote
Old 06-28-2007, 05:29 AM   #18
tungpo1
Gone Wild
 
tungpo1's Avatar
E-Z-GO
 
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
Default Re: Painting the frame

LOL!!!!!!!
tungpo1 is offline   Reply With Quote
Old 06-28-2007, 11:16 AM   #19
2stroke
Gone Wild
 
Join Date: Jan 2007
Posts: 382
Default Re: Painting the frame

rofl!!!
2stroke is offline   Reply With Quote
Old 06-30-2007, 05:05 PM   #20
Xtreme Cartz
The Fabricator
 
Xtreme Cartz's Avatar
 
Join Date: Dec 2006
Posts: 2,016
Default Re: Painting the frame

LOL
Xtreme Cartz is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes



All times are GMT -5. The time now is 01:55 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.