ZONGSHEN 625CC engine

leschilli67 · 01-03-2018, 07:25 PM

I had to cut mine off , since it is a rear facing mount (Yamaha) the jug is right over top of it.

Sent from my iPhone using Tapatalk

leschilli67 · 01-03-2018, 07:29 PM

I got the install directions for the 460. They don’t have them done yet for the 625, really had no problems . The wiring was a little tricky for me but I got it. The only other thing Aaron told me to do differently is to leave about 2” of slack in my drive belt..initially thinking that’s gonna work out just fine, I have a video if I can snatch it off of Marco Polo of a run I did, language may be rough..lol

Sent from my iPhone using Tapatalk

leschilli67 · 01-03-2018, 07:31 PM

Should I post it if I can?

Sent from my iPhone using Tapatalk

leschilli67 · 01-03-2018, 07:51 PM

Well it won’t let me post video, gonna see if I can post it on their Facebook page

Sent from my iPhone using Tapatalk

Rooster59 · 01-03-2018, 09:02 PM

Thanks for the tips. I would like to see that video les.

leschilli67 · 01-03-2018, 09:05 PM

Quote:

Originally Posted by Rooster59

Thanks for the tips. I would like to see that video les.

I sent you a message if you send me your email address I should be able to send it that way

Sent from my iPhone using Tapatalk

Rooster59 · 01-04-2018, 10:13 PM

The video was awesome. I laughed every time I watched it. Reminds me of a good friend here. Especially the crowbar incident.

leschilli67 · 01-04-2018, 10:16 PM

Lol I tried to edit but it wouldn’t let me...guess I was so excited to take a ride I forgot it was back there. I was concerned about the clanging going on at first, till it fell off and I realized what it was.

Sent from my iPhone using Tapatalk

Rooster59 · 01-05-2018, 08:38 AM

I have a question for anyone who has the Vegas Carts three circuit 24mm carb either on a 625 or the 460. If you mounted a round filter adapter is the intake hole in the adapter as large as or larger than the carb throat? I looked at some adapters this week and some of them don't mention the throat diameter and some state a throat ID smaller than the throttle plate size of 27mm/1.06". If I were going to use a filter adapter wouldn't I want one at least as large as the throttle plate?

tireguy · 01-05-2018, 09:33 AM

Rooster I will be working on carb and intake this weekend will let you know

01-03-2018, 07:25 PM	#51
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine I had to cut mine off , since it is a rear facing mount (Yamaha) the jug is right over top of it. Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

01-03-2018, 07:29 PM	#52
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine I got the install directions for the 460. They don’t have them done yet for the 625, really had no problems . The wiring was a little tricky for me but I got it. The only other thing Aaron told me to do differently is to leave about 2” of slack in my drive belt..initially thinking that’s gonna work out just fine, I have a video if I can snatch it off of Marco Polo of a run I did, language may be rough..lol Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

01-03-2018, 07:31 PM	#53
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine Should I post it if I can? Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

01-03-2018, 07:51 PM	#54
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine Well it won’t let me post video, gonna see if I can post it on their Facebook page Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

01-03-2018, 09:02 PM	#55
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: ZONGSHEN 625CC engine Thanks for the tips. I would like to see that video les.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-04-2018, 10:13 PM	#57
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: ZONGSHEN 625CC engine The video was awesome. I laughed every time I watched it. Reminds me of a good friend here. Especially the crowbar incident.

01-04-2018, 10:16 PM	#58
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine Lol I tried to edit but it wouldn’t let me...guess I was so excited to take a ride I forgot it was back there. I was concerned about the clanging going on at first, till it fell off and I realized what it was. Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

01-05-2018, 08:38 AM	#59
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: ZONGSHEN 625CC engine I have a question for anyone who has the Vegas Carts three circuit 24mm carb either on a 625 or the 460. If you mounted a round filter adapter is the intake hole in the adapter as large as or larger than the carb throat? I looked at some adapters this week and some of them don't mention the throat diameter and some state a throat ID smaller than the throttle plate size of 27mm/1.06". If I were going to use a filter adapter wouldn't I want one at least as large as the throttle plate?

01-05-2018, 09:33 AM	#60
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65	Re: ZONGSHEN 625CC engine Rooster I will be working on carb and intake this weekend will let you know
tireguy Not Yet Wild Join Date: Jun 2017 Posts: 65

Similar Threads
Thread	Forum
VC 625cc kit for a 2004 club car DS	Big Block Talk!
Vegas Carts 625cc to a 87 G2	Clone Engine Swaps
2007 st 350 blown engine, rebuild or new Predator engine?	Gas EZGO
Engine and Wireing Diagram Robin Engine Model # EC253PG	Gas EZGO
Amsoil Synthetic engine oil or Royal Purple engine oil	Big Block Talk!