|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-20-2018, 11:12 AM | #31 |
Not Yet Wild
Join Date: Dec 2015
Posts: 64
|
Re: Xct400pds- sometimes won't go after complete stop
I’m wanting to switch back to the ez pds map, to keep the minimum field amps above 2, but can’t find the old map. Can someone shoot me the file?
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-20-2018, 11:18 AM | #32 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Xct400pds- sometimes won't go after complete stop
Do you know which map you are looking for? There are many PDS maps available, 36v, 48v, regular and speed versions.
|
01-20-2018, 11:37 AM | #33 | |
Not Yet Wild
Join Date: Dec 2015
Posts: 64
|
Re: Xct400pds- sometimes won't go after complete stop
Quote:
This one johnnieb is referencing. Or any that can keep my 42v setup from dropping below the 2A field that Vic recommended I stay over. Sent from my iPhone using Tapatalk |
|
01-20-2018, 11:40 AM | #34 | |
Not Yet Wild
Join Date: Dec 2015
Posts: 64
|
Re: Xct400pds- sometimes won't go after complete stop
Quote:
Really just any that can keep my 42v setup from dropping below the 2A field that Vic recommended. Street use, max speed Sent from my iPhone using Tapatalk |
|
01-20-2018, 11:54 AM | #35 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Xct400pds- sometimes won't go after complete stop
Quote:
It takes a little sorting and editing of the data logs to glean the desired info, but I'll give you a hand in that area if needed. |
|
01-20-2018, 12:20 PM | #36 | |
Not Yet Wild
Join Date: Dec 2015
Posts: 64
|
Re: Xct400pds- sometimes won't go after complete stop
Quote:
Thanks for your help. Where do I access these maps? Have to get with alltrax directly? Sent from my iPhone using Tapatalk |
|
01-20-2018, 12:55 PM | #37 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Xct400pds- sometimes won't go after complete stop
Try these.
One is 48v, the other PDS-DCS 36-48v Do not open or try to read these files as that may corrupt them. Neither of these are the speed maps which will weaken the field more. |
01-20-2018, 01:18 PM | #38 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Xct400pds- sometimes won't go after complete stop
I might run some data logs on those two next summer.
Of course what I get with my 17" tall tires won't be the same as what someone with taller tires will get. I wonder if Alltrax will ever include tire height as a variable in their field mapping subroutine. |
01-20-2018, 02:10 PM | #39 |
Not Yet Wild
Join Date: Dec 2015
Posts: 64
|
Re: Xct400pds- sometimes won't go after complete stop
I loaded up the pds-dcs map, and it’s running great [emoji106].
While I had the motor out and shipped off, i got some 20.5” rear tires and new 3 leaf rear springs. Got them balanced when I had them mounted. Rides nice. I like the rear end jacked up a bit higher. riding Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
New xct400pds | Electric EZGO | |||
Upgraded XCT400PDS and cart are lifeless | Electric EZGO | |||
Alltrax XCT400PDS Trade | Golf Carts and Parts | |||
Hesitation with a newly installed XCT400PDS controller | Electric EZGO | |||
80" ROOF KIT COMPLETE [have 3] 150.00 complete | Golf Carts and Parts |