09-13-2019, 04:51 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 5
|
HD 1970 crank shaft
I have a 1970 3 wheeled harley golf cart i am trying to make running again and i have a 1984 columbia i am using for parts, i am unable to find any primary clutches for the 9 spline crank (1970), where could i find a primary clutch, or could i swap cranks with the 1984 engine ( i think it has the 5 or 6 spline and can find more of them)? i want to swap cranks so i have original engine but with different clutch so its somewhat original and 1984 engine is blown. if anyone has a 1970 primary clutch i am willing to buy.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-13-2019, 05:02 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: HD 1970 crank shaft
The columbia has a tapered crank. That clutch is at vintage carts BUT very expensive. That whole engine could be swapped in BUT again intake and exhaust are different.
|
09-13-2019, 06:24 PM | #3 |
Not Yet Wild
Join Date: Sep 2019
Posts: 5
|
Re: HD 1970 crank shaft
both engines look the same (exhaust and intake) the cranks ends are just different, they are both 3b carts
|
09-13-2019, 07:25 PM | #4 |
Not Yet Wild
Join Date: Sep 2019
Posts: 5
|
Re: HD 1970 crank shaft
Ok, I'll have to just find a 9 spline or do an engine swap
|
Tags |
harley 3 wheel, harley davidson golf cart |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Crank Shaft Has Been Turned | Big Block Talk! | |||
1970 D crank bearing help please | Gas Harley Davidson | |||
Crank shaft difference | Gas Harley Davidson | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha | |||
I need a g9 crank shaft really bad | Golf Carts and Parts |