|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-30-2021, 08:29 PM | #1 |
Not Yet Wild
Join Date: Jun 2021
Location: Rock hill, SC
Posts: 1
|
96 medalist txt need help with reverse and switch.
I have a 96 medalist txt. The cart has the dcs system in it with a curtis 9 pin controller. I'm very new to carts but am mechanically inclined. I bought the cart with a bad diode in the early style reverse switch. I bought a 6 pin club car f&r and wired the switch up in place of the old switch with diode. So right now the cart goes forward in reverse and in forward. I followed the wiring diagram I found on this site via search. Before I was getting nothing in reverse now it goes forward in both positions with the new switch I wired. I'm wanting to know what exactly I need to test at the controller to make sure I wired it right (what pins need what voltage/ activated and which ones don't) thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
9 pin, dcs, f&r |
|
|
Similar Threads | ||||
Thread | Forum | |||
Changing keyed Forward/reverse switch to rocker switch | Electric EZGO | |||
Wiring Alltrax for reverse with single micro-switch F&R switch... | Electric Club Car | |||
EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
99 medalist reverse not working | Electric EZGO |