How to fix bad wheel alignment!

[DBallin69]

So Ive seen alot of people on here who have lifted there carts and are wondering how they can fix the alignment. My cart is a G16E with a 4" economy lift. Who ever owned it before me put coil over air shocks on the back. The back of my cart was about 3 inches higher then the front. I raised the front of my cart 1 7/8" so that it would be an inch lower then the rear. My tires were so far off as you can see in the pic. My cart now has about a 6" lift with stock a arms. Here is how I fixed my alignment. I used a cut off wheel and cut my a arms on both sides and the bottom. I then bent the arm and opened it up so there is about a 3/8" gap whick is what I needed to fix the alignment. I then welded 1/4" plate steel on the 2 sides and the bottom. I also had to fix the steering because of the increased lift. I used a piece of 4"x1/4" C channel. I removed my Steering arms and bolted them ontop of the C channel. My cart now turns just like it did stock except i now have 23x10x14" wheels. Now my wheels sit flat when its on the ground and looks great. This is a real easy and cheep fix for anyone who can use a few tools and a welder. If anyone else trys this or has already done it let me know how it works for you. Hope it helps a few people out.

[hello]

Good job and nice looking cart.

[DBallin69]

Thanks!