|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-29-2021, 08:21 PM | #1 |
Getting Wild
Join Date: Jul 2020
Posts: 75
|
G16 front hub
I've got some play in one of the front hubs on my G16, I've got a G14 parts cart that I'm thinking about getting one off of or should I just go ahead & get a new one?
Are aftermarket ones worth fooling with? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-31-2021, 07:52 PM | #2 |
Getting Wild
Join Date: Jul 2020
Posts: 75
|
Re: G16 front hub
Any known issues with the aftermarket front hubs that come with bearings installed??
|
02-01-2021, 07:04 AM | #3 |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 641
|
Re: G16 front hub
Assuming that the nut is tight I would just change the bearings. They aren't that expensive nor are they difficult to change. Especially if you have a press but it isn't mandatory.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing Front Shocks w/o Front Cowl Removal | Electric EZGO | |||
Front Suspension Clinging and Clanging. How To Take Off Front Body? | Electric Club Car | |||
Txt Front end Squaring after front axle replacement | Electric EZGO | |||
WTB G1 front axle and front bumper | Golf Carts and Parts | |||
Precedent Front lights / front blinkers not working .... Where do I start looking? | Electric Club Car |