|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-27-2010, 10:06 PM | #1 |
Getting Wild
Join Date: Mar 2009
Location: Middletown, Missouri
Posts: 103
|
1991 G2 question. axle conversion
Found a complete G2 today after a couple years of waiting for that perfect cart. Ready to make this a done deal but I am wondering if a G16 rear axle can be put into this cart. I plan to big block the cart but feel it has to have a posi rearend for me....
Can a person find a used g-16 rear axle easily? cost? Has anyone replaced a G2/G9 rearend with a G-16 to gain a posi? I really do not want to weld the rearend. Any issues to worry about with a conversion like this? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2010, 06:08 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: 1991 G2 question. axle conversion
A stock G16 axle isn't posi.
|
09-28-2010, 07:04 AM | #3 |
Getting Wild
Join Date: Mar 2009
Location: Middletown, Missouri
Posts: 103
|
Re: 1991 G2 question. axle conversion
Yeah I know but you can buy a posi unit from a couple sources.
Do you suppose it would fit? line up, etc? |
09-28-2010, 09:20 PM | #4 |
Getting Wild
Join Date: Mar 2009
Location: Middletown, Missouri
Posts: 103
|
Re: 1991 G2 question. axle conversion
dead deal....G2 which appeared perfect had severe frame rot under the battery. The owner tried to cover it up with treadplate skid guards....too bad to deal with
Real hard to find a G2/G9 in good shape in my area |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Electric to gas conversion question | Electric Club Car | |||
HEI Conversion question | Gas EZGO | |||
Question about BB conversion throttle linkages. | Big Block Talk! | |||
I need a driver side axle 1991 G9 | Golf Carts and Parts | |||
Newb Question About Big Block Conversion | Big Block Talk! |