EZGO 2stroke clutch

[dzig_33]

I am working on this cart for a friend. Mfr code 62284. Initial trouble was would not move in reverse, but would go forward. She took it to someone else who told her drive clutch was bad and clutch is $500. She brought it to me, with the outer half of the drive clutch all ready removed. The threads on the spider are about half gone and the rollers and pucks pretty well worn out. What I don't know, is what holds the spider onto the threaded part of the inner half shaft. It looks like what was happening was when the engine ran in reverse that the spider unthreaded so no go, then would thread back on when spinning forwards. Are there any used clutches out there as she doesn't want to spend much, but, of course would like to have her cart back and running. Thoughts or comments?

[dzig_33]

Could someone tell me what locks the spider onto the threaded part of the clutch shaft?

[ruredy]

can you post a pic of it? Not really sure what your talking about.

[rusty]

Welcome to the forum dzig_33................

[dzig_33]

Here are pics of the spider and clutch shaft. Is the spider locked to the shaft by three roll pins after they are threaded together? As I stated earlier, the drive clutch was in pieces when the cart was brought to me, so I am trying to figure out how it all fits together if the clutch was any good. I am looking for a used one to see if I can get her cart going. Is there a parts diagram for this clutch out there that I could look at?