Camber Question

nobogez42 · 02-06-2016, 12:58 PM

I have a 2007 CC Precedent with a Jakes 3" spindle lift. My camber is currently the same on both wheels as it should be. However, The gap created by using the framing square is at the top of the wheels / \ is there a way to make it \ / and does it really matter?

lockman1 · 02-07-2016, 08:39 AM

I had the same situation with my 07 DS and 3" spindles...
You can adjust the camber (sort of) by using the factory eccentric adjustment,
it will get you very close to straight up and down ( |-| ) but it won't get you \-/

Here are the factory camber adjustments:
(click pics to enlarge)

Precalign1.jpg

Eccentric.jpg

precalign2.jpg

Precalign3.jpg

Hope this helps!

02-06-2016, 12:58 PM	#1
nobogez42 Gone Wild Join Date: Mar 2012 Location: Cullman, AL/Destin, FL Posts: 268	Camber Question I have a 2007 CC Precedent with a Jakes 3" spindle lift. My camber is currently the same on both wheels as it should be. However, The gap created by using the framing square is at the top of the wheels / \ is there a way to make it \ / and does it really matter?

02-07-2016, 08:39 AM	#2
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,932	Re: Camber Question I had the same situation with my 07 DS and 3" spindles... You can adjust the camber (sort of) by using the factory eccentric adjustment, it will get you very close to straight up and down ( \|-\| ) but it won't get you \-/ Here are the factory camber adjustments: (click pics to enlarge) Precalign1.jpg Eccentric.jpg precalign2.jpg Precalign3.jpg Hope this helps!

Similar Threads
Thread	Forum
Camber adjust question	Lifted Golf Carts
camber question	Lifted Golf Carts
G1 camber?!?	Gas Yamaha
Correct Camber Settings Question	Electric Club Car
Alignment (Camber)	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum