|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-04-2011, 03:14 PM | #1 |
Gone Wild
Join Date: Feb 2010
Location: Florida
Posts: 184
|
Is there any need for me to upgrade my cables?
I have a stock 2010 Club Car Precedent. It is the signature edition with 10 inch tires. it is set on speed 4 which I believe gets me about 19 mph. I don't intend to add a lift kit or larger tires or bigger motor. Will I see any increase in performance by upgrading to 4 ga. cables? If so, what will I notice or how will the upgrade enhance the cart if at all. The local club car dealer said there was no need to upgrade. I would appreciate some insight from the experienced guys on this forum. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-04-2011, 04:55 PM | #2 |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
Run it a while and feel the cables. If they are hot that is a sign that they are in need of replacement.
Sent from my iPhone using Tapatalk |
09-04-2011, 09:50 PM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: Is there any need for me to upgrade my cables?
you should notice a difference in available torque. you won't gain any speed, but you will get to 19 faster/with more authority. less bog going up hills, etc.
-sj |
09-05-2011, 01:39 PM | #4 | |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: Is there any need for me to upgrade my cables?
Quote:
|
|
09-05-2011, 05:22 PM | #5 |
Gone Wild
Join Date: Feb 2010
Location: Florida
Posts: 184
|
Re: Is there any need for me to upgrade my cables?
Thanks for the help guys. I am not going to to any mods so I will keep everything stock until its time to replace something and then think about upgrading. I checked the cables after running a bit and they aren't hot at all. Not even very warm to touch so everything seems fine.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Old cables vs New cables. | Electric EZGO | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO | |||
what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO | |||
WHat cables need changed? 4 gauge upgrade | Electric EZGO | |||
G9 cables | Gas Yamaha |