|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-24-2013, 08:03 AM
|
#1 |
|
Not Yet Wild
 Join Date: May 2010
Location: Fort Scott, Kansas
Posts: 40
|
Reverse only
I changed motors in a EZ Go TXT that I am selling from a GE Raptor to a stock 2HP EZ GO motor. I rewired it as the diagram instructed and as the "Raptor" was wired. If I remember correctly the "Raptor ran opposite so I figured I might have to Switch S1 & S2 and I did.
It still runs full speed in reverse and barely crawls i forward, Tried switching A1 & A2 and still got the same results. Placed rear end on jack stands and forward seemed to be full speed and reverse 1/2 speed, but as soon as I lowered the cart it returned to reverse full speed and forward very little movement. I checked pack voltage = 37.96 Voltage through all FNR microswitches = 37.25 Voltage to and through FNR switch = 37.25 Cart had always ran well so I am puzzled where to go next. I do have several different FNR switch diagrams each with different wiring so I guess I'll try that next. But, it seems to me that should be unnecessary since it ran before. Help please as the cart is to go to its new home Wednesday 6/26/2013 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-24-2013, 08:09 AM
|
#2 |
|
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,965
|
Re: Reverse only
Just so everyone is clear.....you are going back to the stock motor, correct? and is the rest of your cart stock? controller? F/R switch.....etc? what year model is it?
|
|
|
|
|
06-24-2013, 08:51 AM
|
#3 |
|
Not Yet Wild
Join Date: May 2010
Location: Fort Scott, Kansas
Posts: 40
|
Re: Reverse only
Yes I am going back to the stock motor. The cart is a 1997 EZ GO TXT series motor, rest of it is stock except I beefed the FNR switch up and have 4 gauge wiring through out the entire system
|
|
|
|
|
06-26-2013, 08:06 AM
|
#4 |
|
Not Yet Wild
Join Date: May 2010
Location: Fort Scott, Kansas
Posts: 40
|
Re: Reverse only
Okay everybody, I found the answer.
|
|
|
|
|
06-26-2013, 08:15 AM
|
#5 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Reverse only
Quote:
 |
|
|
|
|
|
06-26-2013, 08:25 AM
|
#6 | |
|
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,965
|
Re: Reverse only
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
| Reverse won't go but if I pump gas it slams into reverse | Electric Club Car | |||
| Foward in reverse and reverse in forward | Electric Club Car | |||
| Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
| Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
Linear Mode
