|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-02-2016, 09:27 PM | #1 |
Not Yet Wild
Join Date: Apr 2013
Posts: 4
|
1990 Series speed controller replacement for Curtis 1204-009?
I've got a 1990 EZ-GO cart that has the series motor. It's not the DCS. I've tested the current controller (Curtis 1204-009) and it tests out bad so I'd like to replace it. My dad is a Stens dealer so I can get some controllers quite cheaply. Are any of these compatible?
1205-117 1205M-4601 1205-210 1204M-5201 You can see the whole list here. https://www.stens.com/curtis-products Any help you can give me on this would be great. I also need the link that goes between the throttle bar and the potentiometer. If anyone knows where I can get one. It has the little ball and socket on it. Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-03-2016, 12:58 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1990 Series speed controller replacement for Curtis 1204-009?
You have a 1990 X-444 (Marathon, 4 wheel, controller drive), so you have a 0-5K throttle.
None of the controllers linked to have a 0-5K throttle input. (The 5K-0 is for a Club Car and isn't the same as a 0-5K.) Any 1204 or 1205 with a 0-5K throttle that will run at 36V, will work in your cart. (The higher ampacity ones will work better. ) Here is a parts manual for your cart. The linkage is in the A section. |
01-03-2016, 03:35 PM | #3 |
Not Yet Wild
Join Date: Apr 2013
Posts: 4
|
Re: 1990 Series speed controller replacement for Curtis 1204-009?
Thanks much. I really appreciate the information. I'm handy with the wrench and know my way around some wiring but these controllers and carts are new to me.
I guess I'm off to spend some money! |
07-30-2017, 01:54 PM | #4 | |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 1990 Series speed controller replacement for Curtis 1204-009?
Quote:
|
|
07-30-2017, 02:58 PM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1990 Series speed controller replacement for Curtis 1204-009?
Probably. That was the standard throttle input.
|
07-30-2017, 03:09 PM | #6 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 1990 Series speed controller replacement for Curtis 1204-009?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB Curtis 1204 controller | Golf Carts and Parts | |||
Curtis 1204-001 Speed Controller, Need Replacement | Electric EZGO | |||
Need 1204 curtis controller | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts | |||
Used Curtis 1204 controller | Electric EZGO |