|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-14-2017, 10:29 AM | #21 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
Is the Alltrax XCT controller a plug in an go. Or am
I going to need some type of programmer. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2017, 10:34 AM | #22 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
I pushed on gas pedal still didn't move
|
05-14-2017, 11:48 AM | #23 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Ezgo txt 48 volt not running
Be sure to do these tests with the rear on jack stands.
|
05-14-2017, 11:54 AM | #24 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
Ok tell me what to do
|
05-14-2017, 01:34 PM | #25 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
Should it had run when I jump
Solenoid. It didn't |
05-14-2017, 01:41 PM | #26 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo txt 48 volt not running
Quote:
the cart should run with the controller plugged in and the solenoid engaged. The only thing that should not be plugged in now is the wire from the control to the solenoid you replaced. Remember to not leave the key on when the cart is not in use if it engages the solenoid. |
|
05-14-2017, 01:50 PM | #27 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
Okay well cart still
Didn't run? The solenoid click when I turned the key on but cart still Doesn't run. |
05-14-2017, 02:06 PM | #28 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
At motor I have following voltage .
F1 -51 F2 -51 A1 +42 A2 +42 So Something wrong here |
05-14-2017, 02:09 PM | #29 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: Ezgo txt 48 volt not running
Or is this accurate. This is without pedal pushed
|
05-14-2017, 03:37 PM | #30 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo txt 48 volt not running
If you have power at all the pins I listed originally and the solenoid is closing you have:
a bad controller a bad solenoid a bad motor a bad cable a bad ITS Remove the precharge resistor on the solenoid big posts. put the meter on controller B- and B+ = should read pack voltage when the solenoid clicks. Put the test leads on controller B- and M- = Should read pack voltage (48v) when the solenoid clicks and go down near 0v when the pedal is pushed to the floor. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2006 48 volt club car not running | Electric Club Car | |||
2005 EZGO TXT motor not running and running jerky | Electric EZGO | |||
2010 EZGO not running/running very slowly | Electric EZGO | |||
FYI..running volt reading | Electric EZGO | |||
36 volt charger keeps running | Electric Club Car |