|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-28-2012, 08:30 PM
|
#11 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 98 EZGo Not wanting to Go
Solenoids can 'click' but not make any contact. You can verify this with a voltmeter.
You can also try a solenoid bypass by installing a 6-4g battery cable from one large terminal to the other one. Keep us posted. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-29-2012, 02:15 PM
|
#12 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
I tapped on the solenoid with the back end of a screw driver while mashing the accelerator and the engine started. About that time i heard the solenoid fry.
|
|
|
|
|
05-02-2012, 06:57 PM
|
#13 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
New solenoid came in today. Installed. Still no go. It clicks but that is it. I need help.
|
|
|
|
|
05-02-2012, 07:09 PM
|
#14 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
Will someone look at my pic on the first page and see if I have the batteries wired correctly.
I am getting 37.3 volts to the solenoid. So that means I should have it wired correctly, correct? |
|
|
|
|
05-03-2012, 09:05 AM
|
#15 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
Anyone?
|
|
|
|
|
05-03-2012, 09:41 AM
|
#16 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 98 EZGo Not wanting to Go
Pull the cover off the control and give us some good pics of the solenoid install wiring and the controller connections... If the solenoid is clicking and power is reaching B+ on the control, we have to start suspecting the controller.
|
|
|
|
|
05-03-2012, 03:30 PM
|
#17 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
Not sure what to get a picture of but here goes.
  |
|
|
|
|
05-03-2012, 03:36 PM
|
#18 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
If you are looking at the last picture..and see the 3 large black wires with terminals at the top of the picture. I get a 37.3 reading on the right and the left terminals. The middle indicates no voltage. Is this normal?
|
|
|
|
|
05-03-2012, 04:49 PM
|
#19 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 98 EZGo Not wanting to Go
Find the markings on those terminals B- M- and B+ ( right to left) Put the meter on B- and M- you should have same as the battery pack voltage and it should decrease as you accelerate.
|
|
|
|
|
05-03-2012, 05:03 PM
|
#20 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 37
|
Re: 98 EZGo Not wanting to Go
I do get the same voltage as from the battery pack but it does not decrease as I accelerate.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| ez go not wanting to go... | Gas EZGO | |||
| Always wanting more | Electric EZGO | |||
| G2 not wanting to go into gear | Gas Yamaha | |||
| wanting to buy a clutch for a 92 ezgo 4 stroke | Golf Carts and Parts | |||
Linear Mode
