|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-11-2012, 02:38 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Flowood,MS
Posts: 12
|
99 TXT makes clunking noise from rearend.
I have a 99 TXT and it makes what sounds like gear slack noises from the rear end. I have replaced the spider gear assembly with a new limited slip one from ezgo, I have also called myself inspecting all gears and bearings that I can see or feel. Im thinking it may be slack between the ring gear and the middle gear. The splines on motor and input shaft look good but I do not have the spline bumper that I have seen referenced on other post. Anyone have any suggestions? I have replaced both rear axle bearings also. Thanks in advance....John
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-27-2021, 09:11 PM
|
#2 |
|
Not Yet Wild
Join Date: Aug 2019
Location: Hilton head, SC
Posts: 9
|
Re: 99 TXT makes clunking noise from rearend.
Mine is the same, did you ever find a solution?
|
|
|
|
|
04-28-2021, 06:25 AM
|
#3 |
|
Gone Wild
 Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: 99 TXT makes clunking noise from rearend.
This is a very old post but most of the time when I get this noise it is either the input shaft/motor have worn down...that missing spline bumper from original poster hints to the same...
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Small gap with spindle causing clunking noise after installing Jake's lift. | Electric EZGO | |||
| G1 makes alot of noise | Gas Yamaha | |||
| G1 clunking noise? | Gas Yamaha | |||
| Drive clutch making clunking noise | Gas EZGO | |||
| 83 EZGO txt makes noise/won't go | Electric EZGO | |||
Linear Mode
