|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-25-2014, 05:50 PM | #11 |
Not Yet Wild
Join Date: Jun 2014
Posts: 26
|
Re: 2000 Ezgo TXT PDS upgrade problem
JohnnieB, emailed ScottyB and he says that the main wiring molex plug will not plug into the adaptor harness. Either need to change the main plug or upgrade to a newer year main PDS wiring harness. Any thoughts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-25-2014, 06:28 PM | #12 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2000 Ezgo TXT PDS upgrade problem
Quote:
Added - it'll be tomorrow before I can take the pictures. |
|
06-25-2014, 06:47 PM | #13 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2000 Ezgo TXT PDS upgrade problem
Probably too early to ask, but would the pins be the same, even if they were using a different style plug? If so, worst case would be to either make an adapter, or simply put a new molex plug on the wires.
I had to cut my molex plug off and put spade terminals on my series to fit the AXE. |
06-25-2014, 10:34 PM | #14 |
Not Yet Wild
Join Date: Jun 2014
Posts: 26
|
Re: 2000 Ezgo TXT PDS upgrade problem
Here is some more pictures of the control, main plug, and jack.
Looking at the top of the plug the wires go -green/black strip, white, white/yellow strip, yellow, dark blue. Looking from the bottom side, wires go - red, red/white strip, green, orange, gray. The throttle and run/tow plug are unplugged in these photos |
06-26-2014, 06:25 AM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2000 Ezgo TXT PDS upgrade problem
If there is a physical layout difference between the J1 jack on his 73326G02 controller (Attachment-1) and the J1 jack on the 73326G07 controller (Attachment-2) that used to be in my cart, I sure don't see it.
On both jacks pictured: Pins 1, 4, 5, 7 & 8 are squares. Pins 2, 3, 6, 9 & 10 have rounded edges. |
06-27-2014, 04:04 PM | #16 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2000 Ezgo TXT PDS upgrade problem
What's happening?
Any new info? |
06-27-2014, 04:32 PM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 2000 Ezgo TXT PDS upgrade problem
|
06-27-2014, 04:52 PM | #18 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: 2000 Ezgo TXT PDS upgrade problem
Scotty, you sell PDS harnesses? My last cart I bought a PDS harness from ezgo, it's fairly expensive for what it is. I used Memorial Day discount code to make it a little better price.
|
06-27-2014, 09:13 PM | #19 |
Not Yet Wild
Join Date: Jun 2014
Posts: 26
|
Re: 2000 Ezgo TXT PDS upgrade problem
Been away for the day but wanted to thank everyone for their input. After talking with Scotty some more, I decided that a complete new harness would be the best way to go. Wire and connections update certainly couldn't hurt, no additional splices in the wiring either. Searched the internet and got one ordered. Found it quite a bit cheaper than from the Ezgo site. Thanks Scotty, I will be in touch once I lay eyes on this new harness.
|
06-28-2014, 06:02 AM | #20 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2000 Ezgo TXT PDS upgrade problem
I'm missing or overlooking something here, but I don't know what.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2000 EZGO TXT Gas - Unusual Problem Starting When Hot !!! | Gas EZGO | |||
2000 PDS upgrade HELP!!! | Electric EZGO | |||
2000 EZGo series -- what exactly is needed to upgrade to 48 volts? | Electric EZGO | |||
EZGO PDS performance problem/upgrade | Electric EZGO | |||
2000 ezgo problem | Gas EZGO |