|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
08-21-2018, 09:37 AM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2018
Location: Ontario, Canada
Posts: 16
|
1995 DCS EZGO wiring troubleshooting
Hey guys wondering if someone could send me the info for testing the wiring and motor on a 1995 DCS EZGO 36v.
I cannot seem to get the Solenoid to click without jumping the negative battery terminal to the blue wire from controller. I have removed motor and confirmed it was a DCS motor and tested the ITS and switch. Looking for info for testing the armature on the motor and what each pin on the harness should test and when? Currently I have 36v on both sides of solenoid without click? is that correct? |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1995 ezgo electric wiring | Electric EZGO | |||
| wiring diagram for a 1995 ezgo 36 v | Electric EZGO | |||
| 1995 Medalist Electrical Troubleshooting | Electric EZGO | |||
| 1995 Medalist Troubleshooting Help | Electric EZGO | |||
| 1995 EZGO troubleshooting ? | Electric EZGO | |||
Threaded Mode