|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-24-2021, 12:18 AM | #1 |
Not Yet Wild
Join Date: Nov 2021
Posts: 13
|
Controller
Hello. So i have tried to get a factory controller for my 2007 Yamaha ydre without much luck. Ive installed new batteries, installed new solenoid, cleaned all wires, replaced 1 3amp fuse i found. I thought there’s supposed to be a 2nd? But have only found 1 behind drivers seat? I just purchased an alltrax model spm48225 controller. Ive had a couple local people tell me controller was bad. I don’t know 4 sure? Also the alltrax has B-, B+,M-, where the factory 1 head A1,A2, F1,F2 etc. and the alltrax has 4 straight wire connectors where the factory has a plug with like 30 tiny connectors that 1 large plug connects too? Please help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-24-2021, 12:20 AM | #2 |
Not Yet Wild
Join Date: Nov 2021
Posts: 13
|
Re: Controller
I’m willing to send this controller back and get another if i need too?? Ive had this cart for 3years and never rode on it. I’m ready too for sure.
|
12-24-2021, 05:54 AM | #3 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,968
|
Re: Controller
The Alltrax SPM controller is for series carts, your Ydre is a sepex drive, so that won't fit! You'll need an Alltrax XCT 48300 / 400, direct fit to Yamaha.
|
12-24-2021, 08:39 AM | #4 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,125
|
Re: Controller
Send it back and get the correct controller for your YDRE cart. It is plug and play if you get the correct one. If you have the stock Hitachi motor, it's probably due for new brushes or replacement. They are not very robust motors to put it kindly. (actually they suck)
|
12-24-2021, 03:38 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Controller
You do need an Alltrax XCT controller that has YDRE in the model number.
|
12-30-2021, 06:10 PM | #6 |
Not Yet Wild
Join Date: Nov 2021
Posts: 13
|
Re: Controller
Sorry for the delay. Ive had a busy few days. Thanks for your help. Ill let you know how it turns out.
|
01-10-2022, 11:16 PM | #7 |
Not Yet Wild
Join Date: Nov 2021
Posts: 13
|
Re: Controller
Hey there thx again 4 all the help. I got my new controller n. I’m about to hook it up. Directions say to unhook the positive terminal. I have a tow/run switch. If I put on tow do I still need to unhook the positive?
|
01-11-2022, 05:29 AM | #8 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,968
|
Re: Controller
Yes. There's a fuse coming along with the controller, you'll have to disconnect the pos anyway.
|
01-11-2022, 08:52 AM | #9 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,125
|
Re: Controller
You should Always disconnect a battery terminal when working on your cart!!! The Run/Tow switch only turns off power to the key switch. Battery power is still going to things and you can easily smoke a controller while working on it hot.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Stock curtis 300amp controller to Alltrax SR controller for a 94 club car ds | Electric Club Car | |||
Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO | |||
Navitas TSX 440A Controller, Harness for Club Car IQ-up and Dash-Mount OTF Controller | Golf Carts and Parts | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car |