|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-27-2012, 05:48 PM | #1 |
Not Yet Wild
Join Date: Jul 2011
Posts: 10
|
G1 clutch side crankseal ?
I have 1984 g1 that has bad crankseal i have read some of the theards about installation but still have some questions. Will the clutch and the pulley be pulled in one piece or do i need to remove snap ring and pull clutch from splind shaft.Also what puller do i need
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2012, 06:51 PM | #2 |
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: G1 clutch side crankseal ?
You don't have to remove the snap ring, though you can lube it while your at it, and yes you need a puller about $45.00. when you pull it , it all comes off.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Putting Clutch side Crank seal in a Yamaha G1 | Gas Yamaha | |||
Club Car Clutch Pulley (What Side? | Gas Club Car | |||
Passanger side Brake grabbing more than Driver side | Electric Club Car | |||
right side clutch v twin? | Big Block Talk! | |||
Re: Golf cart .vs. side by side | Golf Carts and Parts |