|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-18-2017, 06:54 PM | #1 |
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Primary clutch puller
I need to replace the drive clutch in my G16. I dont have ttime to purchase the tool so can I just make one out of a rod and use a bolt to push it in? If so anyone know the sizes or is there another way to get the inner sheave out?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-18-2017, 08:02 PM | #2 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Primary clutch puller
14mm dia. x 1mm pitch good luck finding a bolt with that fine of thread many of us on here have looked but no one can find one always end up buying the puller
|
05-20-2017, 11:13 AM | #3 |
Not Yet Wild
Join Date: Mar 2017
Location: Just south of the cheddar curtin
Posts: 11
|
Re: Primary clutch puller
I bought a puller and it was a piece of junk after the first use. Wondering if anyone has retapped the hole to a standard size thread and made their own tool
|
05-20-2017, 03:01 PM | #4 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Primary clutch puller
I have also ruined a cheap one you get what you pay for bought a heavy one and popped the clutch right off that the cheap one wouldn't do
|
05-20-2017, 03:09 PM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Primary clutch puller
Gboost offers lifetime warranty clutch tools.
|
05-20-2017, 03:32 PM | #6 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Primary clutch puller
Some spark plugs have the right size I have read, people knock them apart and make a bolt using the threaded part.
|
05-20-2017, 04:30 PM | #7 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Primary clutch puller
Spark plugs are same size but 1.25 pitch the clutch puller thread is 1.00 if a cheap clutch puller won't pop it off i wouldn't suggest cross threading a sparkplug in there
|
05-20-2017, 04:44 PM | #8 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Primary clutch puller
That would be bad! I don't know what clutches they were using them on but said the plug fit in correctly. if the threads are not right it will never pull anything.
|
05-20-2017, 08:23 PM | #9 |
Gone Wild
Join Date: Aug 2014
Location: Texas
Posts: 250
|
Re: Primary clutch puller
Check out the threads on a Pitman arm puller/seperator.
|
05-20-2017, 08:28 PM | #10 |
Gone Wild
Join Date: Jun 2016
Location: Pittsburgh, PA
Posts: 211
|
Re: Primary clutch puller
http://www.buggiesgonewild.com/desig...-tools-g1.html..
..it has the dimensions you'll need to make one...more than happy to lend mine out if you pay shipping both ways |
|
|
Similar Threads | ||||
Thread | Forum | |||
Diy clutch puller? | Gas Club Car | |||
G2 Primary clutch puller needed | Gas Yamaha | |||
puller for the clutch ? | Gas Club Car | |||
What size thread for Primary Puller Bolt? | Gas Yamaha |