Small fuel pump output on 3PG.

[LukeL]

I have a 3PG ezgo from 1990. The fuel pump was working fine and the gas output was good. I replaced the crankshaft seals on my engine, and now there is very little gas pumping through it.

I have tried two different fuel pumps and there are no clogs in the gas line, which is new.

This is a case mounted pump.

What do I need to check for? Gas barely trickles out when I crank the cart.

Thanks
Luke


Sent from my iPhone using Tapatalk

[cart around]

There is an O ring on the bottom of the pump, a plastic spacer, then a gasket to make everything airtight.

If you have all of that, it's time to check the seals again. They pop out with a backfire.

You should also check to see if the rest of the engine is airtight. The case halves, and where the cylinder bolts on.