|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-08-2018, 02:23 PM
|
#1 |
|
Getting Wild
Join Date: Aug 2012
Location: Pennsylvania
Posts: 76
|
Controller Upgrade?
I have a 94 Yamaha G8E 36v. I put a 6in lift and 22in tires on. Don’t think the controller can handle this with the hilly roads in my campground. It’s fine for about 15-20 minutes then just quits. If I leave it sit for a minute or 2 I can continue. Does anyone know of a controller I can use to help me with this. I’ve been searching online but if someone has done it that would be great. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2018, 02:46 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Controller Upgrade?
The Alltrax SR and SPM lineups will fit your needs. You will have to replace cables with larger ones.
|
|
|
|
|
07-08-2018, 03:36 PM
|
#3 |
|
Getting Wild
Join Date: Aug 2012
Location: Pennsylvania
Posts: 76
|
Re: Controller Upgrade?
Do you think I would be ok using the 300 amp? Or should I go to the 400. I’m fine with the stock performance I just dont want it to keep cutting out.
|
|
|
|
|
07-08-2018, 03:50 PM
|
#4 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Controller Upgrade?
I would go with the 400, or perhaps even 500. The small amp rating is the root of the heat problems you are encountering now.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| D's upgrade to controller | Electric Club Car | |||
| controller upgrade | Electric EZGO | |||
| RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
| Controller Upgrade | Electric EZGO | |||
| Controller upgrade | Electric EZGO | |||
Linear Mode
