|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-23-2021, 10:16 AM | #11 |
Gone Wild
Join Date: Apr 2020
Location: Hurricane, Utah
Posts: 2,799
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
So this is kind of what I was expecting from mine once I got it running, but I don't have anywhere near that experience (maybe I should say "yet"). My motor is only 7 HP, so that might have something to do with it, but it is a speed and torque motor also. What is your HP, BBBHC?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-23-2021, 01:08 PM | #12 | |
Getting Wild
Join Date: Jan 2021
Posts: 75
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
Quote:
|
|
01-23-2021, 02:03 PM | #13 |
Getting Wild
Join Date: Jan 2021
Posts: 75
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
BBBHC i just got my 14 leaf modules in and with the measurements on them and the frame it looks like splitting them into two groups of 7 and then paralleling those together is my best opinion for space reasons in the old battery trays. Im going to go get some diamond plate aluminum and make a subfloor where the old battery trays were so its all closed off and flat and clean under the seat. The battery packs will mount to the diamond plate.
|
01-23-2021, 02:32 PM | #14 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
The best option is to parallel two modules at the time and then split the packs in two series packs: 8 modules + 6 modules.
That requires a single cable between the two packs and allows you to use a single BMS. |
01-23-2021, 02:43 PM | #15 |
Getting Wild
Join Date: Jan 2021
Posts: 75
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
Got ya and thanks Sergio. I have also read a lot of your post with the lithium swap. Do you think zeva bms is my best option or tinybms? Any other good options out there ?
|
01-23-2021, 02:50 PM | #16 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
Don't use the vglide and don't do the low speed gears.
Look at the electronic pedal scotty sells, mcor 4 from Dave Hicks or go with the Curtis PB-6. The MCOR 4 conversion would be my first choice. The PQ Grizzly will give you more than enough torque to do the things you want with the load you intend to carry without the gear swap and I'd probably stick with 22s or at the most 23s to negate any further torque loss over stock sizes tires. Your top speed with 22s will probably be in the 20mph zone. As far as controllers go, coming from someone who's had the FSIP 700 and now an Alltrax SR500; the sustained output of the SR500 is more than the FSIP 700's and should be more than enough amps for the loads you'll be pulling. You're battery pack will never pull the full peak potential of 570 amps the Alltrax SR500 can provide and if it ever gets any close to that, it'll only be for milliseconds. |
01-23-2021, 08:22 PM | #17 |
Not Yet Wild
Join Date: Jun 2020
Location: SE. Texas
Posts: 2
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
One interested total green hand watching this with interest & spinning head over all the tech stuff.
|
01-23-2021, 11:41 PM | #18 |
Gone Wild
Join Date: Aug 2020
Posts: 261
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
FYI I did my hunting buggy just like you’re talking about and it’s far from silent. Between the squeaks, the tires, and the motor whine, it makes plenty of racket going down the trail.
|
01-24-2021, 07:14 PM | #19 |
Getting Wild
Join Date: Jan 2021
Posts: 75
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
90% of my farms I manage the hogs and coyotes on are sugar sand roads. So tires wont make noise. Now for the squeaks from the cart thats a no go. Ill have to find them and fix them. If the motor whines i guess i cant do much about that. Guess ill build it and if it doesn't meet my needs or likes I will get rid of it and just keep walking 10 miles a night. Then get the 4wheeler or truck and go collect all the dead ones.
|
01-24-2021, 11:08 PM | #20 | |
Getting Wild
Join Date: Oct 2014
Posts: 102
|
Re: Making a silent hunting buggy. Alltrax SR48600 or FSIP 700amp controller?
Quote:
Your electric cart will be plenty quiet to drive up on animals. I do it all the time. I can easily get into bow range of deer and hogs at night and definitely easy rifle range in the middle of the day. Sent from my iPhone using Tapatalk Pro |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax Sr48600 Code | Electric EZGO | |||
700amp FSIP(GE) controller | Electric EZGO | |||
Silent Beast Older Hunting Buggy | Electric EZGO | |||
Ezgo 36V (Hunting buggy)which motor and controller? | Lifted Golf Carts | |||
FSIP OR ALLTRAX 500 amp controller | Lifted Golf Carts |