|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-27-2021, 10:18 PM | #1 |
Not Yet Wild
Join Date: Apr 2020
Posts: 12
|
Txt with altrax and plum quick very slow and laggy
The txt has the 500a alltrax with the plumquick bandit motor. Has lost reverse completely, was semi working sometimes(believe to be the f&r switch) correct me if I'm wrong on that..
But main issue is Top speed is less then 12mph on flat ground.(setting haven't been changed lately b4 it messed up would easily do 24-25mph. Can cruise around 12mph let off the throttle and repress and it just like dies loses all power almost stops. What is causing this b4 I start to throw money at it.. Is the motor shot Is the controller shot What am I missing? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-28-2021, 05:30 AM | #2 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: Txt with altrax and plum quick very slow and laggy
Use the Alltrax Toolkit Software w PC/Laptop and check the controller
|
07-28-2021, 07:10 AM | #3 |
Not Yet Wild
Join Date: Apr 2020
Posts: 12
|
Re: Txt with altrax and plum quick very slow and laggy
|
07-28-2021, 08:07 AM | #4 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: Txt with altrax and plum quick very slow and laggy
I've recently worked on a not running Yamaha cart with an Alltrax XCT controller, no fault codes flashed by the controller but when monitoring with the Toolkit software i've found a missing throttle signal and a missing rpm signal also. Easy to fix both and the cart was back to life.
|
07-28-2021, 09:34 AM | #5 |
Gone Wild
Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
|
Re: Txt with altrax and plum quick very slow and laggy
Is this a new combo that's not performing well or is this an old combo that was performing great and now is not?
If it's new is this a sepex cart or series since the bandit can be done to either? If it's a sepex cart I'm wondering if you need a different field map. |
07-28-2021, 12:35 PM | #6 | |
Not Yet Wild
Join Date: Apr 2020
Posts: 12
|
Re: Txt with altrax and plum quick very slow and laggy
Quote:
I will check into that thanks |
|
07-28-2021, 12:36 PM | #7 | |
Not Yet Wild
Join Date: Apr 2020
Posts: 12
|
Re: Txt with altrax and plum quick very slow and laggy
Quote:
No this is a older combo that performed well till recently and it's a series cart |
|
07-28-2021, 12:46 PM | #8 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Txt with altrax and plum quick very slow and laggy
Check the throttle voltage.
Should get 10V with pedal up between the black and the white wires and 6V with pedal down. |
10-22-2021, 09:03 AM | #9 |
Not Yet Wild
Join Date: Apr 2020
Posts: 12
|
Re: Txt with altrax and plum quick very slow and laggy
Ok.. update. Been a while been busy.. I have replaced the throttle switch at the pedal. Didn't help.. so I thought soleniod might be the issue. Nope not it either. And then I replaced the f&r switch. Not not it.. and the alltrax controller doesn't have any codes... im stuck I don't know what else it could be. Any idras?
|
10-22-2021, 09:07 AM | #10 |
Not Yet Wild
Join Date: Aug 2021
Posts: 17
|
Re: Txt with altrax and plum quick very slow and laggy
Did you spin the motor posts when you installed the cables? They say to use 2 wrenches to keep them from spinning.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
48v series club car plum quick slow | Electric Club Car | |||
where do I find the file for my altrax control for my plum quick motor | Electric EZGO | |||
plum quick | Electric EZGO | |||
Plum quick said I can't go 48v | Electric EZGO | |||
Thanks Plum Quick! | Announcements |