|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-09-2012, 02:28 PM | #1 |
Not Yet Wild
Join Date: Jul 2012
Location: Tx
Posts: 1
|
2000 club car gear reduction?
Can anybody tell me if or how to install a gear reduction in my gas club car.ialready have a spring kit for the front and rear clutches along with a turn key idle switch.new belt , and adustments to the throttle .I am looking for as much low end grunt as possible .this cart is used only for hunting and has to cross very crazy terrian, I installed a 6 inchlift with 22 iniin inch mud tires and a winch , but sometimes I still need a little help , I have a fourwheeler but its just to loud for what im doin tks open to suggestions .
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-11-2012, 11:34 PM | #2 |
Gone Wild
Join Date: Apr 2010
Location: Interlachen,Fl
Posts: 326
|
Re: 2000 club car gear reduction?
Never heard of seen a gear reduction on a cart. What I did was ordered a severe duty belt from CPP and helped a great deal. I have a Carryall 2 with an 8" lift and 25" tires and can be fully loaded and can climb sandy hills like crazy. Also have the timing advance key installed too.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G22A - engine / exhaust noise reduction | Gas Yamaha | |||
Inventory Reduction/cleaning out garage | Golf Carts and Parts | |||
AC Drive Kit price reduction | Golf Carts and Parts | |||
2000 G19 Cart - Regen Motor and Gear Set Opinions | Electric Yamaha | |||
Noise reduction | Electric EZGO |