|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-14-2015, 06:12 PM | #11 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: precedent w/ DCX500IQ troubleshooting help needed
You mentioned an upgraded motor. Have you called Alltrax and got the field map that matches your motor to the controller?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-14-2015, 06:13 PM | #12 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: precedent w/ DCX500IQ troubleshooting help needed
Quote:
|
|
06-14-2015, 06:28 PM | #13 | |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: precedent w/ DCX500IQ troubleshooting help needed
Quote:
Seems like something changed in your program or the controller has an issue. Do that change as Scotty says to see if the 1/2 reverse was the problem. |
|
06-14-2015, 06:47 PM | #14 |
Not Yet Wild
Join Date: Jan 2009
Location: Houston, Tx.
Posts: 55
|
Re: precedent w/ DCX500IQ troubleshooting help needed
OK. here is another rabbit trail. In the process of looking online and such at the alltrax site for the DCX500IQ, it says they are a shunt motor controller and the wiring schematic shows a S1 and S2 connection on the motor. However, I noticed on my motor that it has a F1 and F2 connection label. Could the previous owner have installed the wrong motor? If so, would it work for a period of time then start having these issues I am seeing? Or are the labelings interchangeable?
Just a thought.... |
06-14-2015, 06:49 PM | #15 |
Not Yet Wild
Join Date: Jan 2009
Location: Houston, Tx.
Posts: 55
|
Re: precedent w/ DCX500IQ troubleshooting help needed
Considering I don't even have the programming software and have never hooked it up to a computer, I am not sure how it could have gotten changed.
|
06-14-2015, 07:03 PM | #16 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: precedent w/ DCX500IQ troubleshooting help needed
Quote:
The software is a free download from Alltraxinc.com |
|
06-14-2015, 07:16 PM | #17 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: precedent w/ DCX500IQ troubleshooting help needed
If you search the Alltrax website you can get all of the information to check your programming, the software once installed on a laptop or computer is easy to use. Then you can try what Scotty is suggesting, this will eliminate one possibility. If this isn't the problem and something went wrong with the controller it could be an issue with the mapping or the program or the actual controller.
|
06-14-2015, 07:45 PM | #18 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: precedent w/ DCX500IQ troubleshooting help needed
The only thing different in the circuit whether your in reverse or forward is the Forward/Reverse switch. I would try changing it. No telling somebody may have stomped it or got wet and its not making good connection in rev. Or there is a rubber gasket around the sw which may have come loose and preventing it from closing correctly. Hope this helps.
|
06-14-2015, 07:48 PM | #19 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: precedent w/ DCX500IQ troubleshooting help needed
That is a good thought, you can probably just swap the wires on the switch and see the results. There are three wires, yellow blue brown.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2003 TXT Troubleshooting help needed | Gas EZGO | |||
Alltrax DCX500IQ | Electric Club Car | |||
2002 electric txt troubleshooting help needed | Electric EZGO | |||
Dcx500iq | Electric Club Car | |||
Robin EC25-2PG 2 Cycle Nightmare and troubleshooting help needed | Gas golf carts |