|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-22-2015, 06:56 AM | #1 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Nothing after conversion
The conversion on my 2001 DS is complete. I used a curtis controller, a 1000/400 solenoid, t-875"s, #2 wires, HD F&R, and a pot box from an ezgo 0-5k. It charged all day yesterday and when the charger shut off I tried it....NOTHING!! Not even a click. My old F&R switch didn't have micro switches on it. The new one has two connectors and six wires coming out of it. I'm not sure what they all should be connected to. I used scottyb's wiring schematic and ran the two wires from the pot box back the the controller, otherwise I'm stumped.....
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-22-2015, 08:20 AM | #2 |
Gone Wild
Join Date: Dec 2011
Location: Hampton, GA
Posts: 467
|
Re: Nothing after conversion
Your pot box and F&R switch should have mirco switches to complete the power loop to the solenoid,
|
08-22-2015, 08:34 AM | #3 |
Gone Wild
Join Date: Aug 2011
Posts: 553
|
Re: Nothing after conversion
Are you using a sepex controller on a series motor, the micro switches dr vs no micro switch
|
08-22-2015, 11:25 AM | #4 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Re: Nothing after conversion
I saw that on the print. My pot box didn't have any micro switches on it. Can I get them separately or do I need another pot box altogether? Thanks
|
08-22-2015, 12:05 PM | #5 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Re: Nothing after conversion
|
|
|
Similar Threads | ||||
Thread | Forum | |||
72v ac conversion | Extreme DC! | |||
AC conversion in CC | On Road Golf Carts! | |||
48v conversion (need help) | Electric Club Car | |||
4WD conversion | Electric EZGO | |||
gas conversion | Gas EZGO |