|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-31-2015, 07:44 PM | #1 |
Not Yet Wild
Join Date: Dec 2015
Location: san diego ca
Posts: 23
|
g1 j17 wiring
does any body know witch wire is hot with key on fwd thanks buzzdone
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-31-2015, 07:49 PM | #2 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 j17 wiring
|
12-31-2015, 07:56 PM | #3 |
Not Yet Wild
Join Date: Dec 2015
Location: san diego ca
Posts: 23
|
Re: g1 j17 wiring
when is the ing hot i am looking for a hot wire key on only to power a sol. for a fuzze block buzzedone
|
12-31-2015, 08:04 PM | #4 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 j17 wiring
|
12-31-2015, 10:23 PM | #5 |
My wife says I'm crazy...
Join Date: Sep 2014
Location: Central Ohio
Posts: 384
|
Looks like he wants to know what wire has no power with ignition of and powered with key on. I pulled the g1 wiring diagram at Cunningham's and I could make no sense of it. My g16a is the red/white wire.
|
12-31-2015, 10:29 PM | #6 | |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 j17 wiring
Quote:
You have to press the gas pedal before power is applied to the keyswitch yellow or blue wires(FWD/REV solenoids) |
|
12-31-2015, 10:37 PM | #7 |
My wife says I'm crazy...
Join Date: Sep 2014
Location: Central Ohio
Posts: 384
|
g1 j17 wiring
And I just learned something about the g1. Wasn't aware of that. Thanks!
|
12-31-2015, 11:23 PM | #8 |
Not Yet Wild
Join Date: Dec 2015
Location: san diego ca
Posts: 23
|
Re: g1 j17 wiring
thank you all for the help sounds like i am going to have to run a sw to power my acc in sted of key on only will post pics on how the cart is comming alonge almost ready thanks buzzdone
|
01-01-2016, 12:13 AM | #9 |
My wife says I'm crazy...
Join Date: Sep 2014
Location: Central Ohio
Posts: 384
|
Can always run a breaker to regulate easily. All of my accessories run on a breaker that I can kill if needed on top of positive fuse box
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Controller wiring/DCS fnr switch wiring | Electric EZGO | |||
help with wiring | Electric EZGO | |||
wiring help | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO |