|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-06-2016, 07:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2012
Location: South Australia
Posts: 34
|
Now need choke to start
Replaced throttle cable on my Yamaha G1 now requires choke to start, didn't need choke prior to this. Any clues?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-07-2016, 03:18 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Now need choke to start
Check to make sure butter fly in the carb is closing all the way also seen the throttle shaft wear and allow air in causing it to lean out and need choke to start
|
|
|
|
|
07-08-2016, 04:22 AM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2012
Location: South Australia
Posts: 34
|
Re: Now need choke to start
Have checked carby butterfly and all looks good, also checked throttle arm and was able to fix the sloppiness that was present. Still needs choke and also finding car is surging under load.
|
|
|
|
|
| Tags |
| choke, replaced, start issues, throttle cable, yamaha g1 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| shuts down choke to start | Gas Club Car | |||
| G16A will not start without the choke | Gas Yamaha | |||
| need choke to start | Gas EZGO | |||
| need choke to start. | Gas EZGO | |||
| won`t start w/o choke | Gas Yamaha | |||
Linear Mode
